http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Atmel Electronic Components Datasheet

ATR0841 Datasheet

4-channel Laser Driver

No Preview Available !

ATR0841 pdf
www.DataSheet4U.com
Features
Current-controlled Output Current Source with 4 Input Channels
LVDS Compatible Inputs, Channel 2, 3, and 4, with On-chip 100 Termination
Two Selectable Outputs for Grounded Laser Diodes
Output Current per Channel up to 350 mA
Total Output Current up to 500 mA
On-chip RF Oscillator
Control of 2 Different Swings and Frequencies by Use of 4 External Resistors
Oscillator Frequency Range from 200 MHz to 500 MHz
Maximum Oscillator Current Amplitude 100 mApp
Single 5 V Power Supply
Small Pb-free QFN24 4 mm × 4 mm Package
Applications
DVD Blue Laser
DVD-RAM/DVD-RW/DVD+RW with CD-RW Capability
Recordable Optical Drives
Description
The ATR0841 is a laser diode driver designed to operate two differently grounded
laser diodes for DVD-RW/+RW (650 nm) and CD-RW (780 nm). The device includes
four channels for four different optical power levels. The write channels (channel 2 to
4) can be controlled by fast LVDS (Low Voltage Differential Signaling). Due to the inte-
grated termination external resistors are not needed.
The function of the read channel is to generate a continuous output current, channels
2 to 4 are designed as write channels with very fast switching speed. All channels are
summed together and routed to one of the two outputs, IOUTA or IOUTB, controlled
by the select input SELA. Each write channel (channels 2 to 4) can contribute up to
350 mA to the total output current of up to 500 mA. The read channel can contribute
up to 150 mA. Total gain of 100 (read channel) and 250 (channel 2, 3 and 4), respec-
tively, are provided between each reference current input and the selected output.
Although the reference inputs are current inputs, voltage control is possible by using
external resistors. An on-chip RF oscillator is available to reduce laser-mode hopping
noise during read mode. The oscillator current amplitude can be set independently for
the two selectable outputs with two different resistors. Oscillation is enabled by a high
signal at the ENOSC pin. Complete shut down of the output currents is achieved by a
low signal at the ENABLE input.
In case of uncertain (balanced) enable signals, a built-in protection circuit keeps the
laser diode output current within the defined range.
4-channel Laser
Driver with
2 Outputs,
3 LVDS Inputs
and Internal
Termination
ATR0841
Summary
Rev. 4818AS–DVD–09/04


Atmel Electronic Components Datasheet

ATR0841 Datasheet

4-channel Laser Driver

No Preview Available !

ATR0841 pdf
Figure 1. Block Diagram
I4
E4
NE4
Channel 4
I3
E3
NE3
I2
E2
NE2
Channel 3
Channel 2
IOUTA
IOUTB
IR
Channel 1
Read Channel
ENABLE
ENOSC
RF oscillator
RFA RFB RSA RSB
SELA
2 ATR0841
4818AS–DVD–09/04


Part Number ATR0841
Description 4-channel Laser Driver
Maker ATMEL Corporation
Total Page 6 Pages
PDF Download
ATR0841 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 ATR0840 4-channel Laser Driver ATMEL
ATMEL
ATR0840 pdf
2 ATR0841 4-channel Laser Driver ATMEL Corporation
ATMEL Corporation
ATR0841 pdf
3 ATR0842 4-channel LVDS Laser Diode Driver ATMEL
ATMEL
ATR0842 pdf
4 ATR0843 4-channel Laser Driver ATMEL
ATMEL
ATR0843 pdf
5 ATR0844 4-channel Laser Driver ATMEL
ATMEL
ATR0844 pdf
6 ATR0849 4-Channel LVDS Laser Driver for Dual-layer Application ATMEL Corporation
ATMEL Corporation
ATR0849 pdf
7 ATR0849 4-Channel LVDS Laser Driver for Dual-layer Application ATMEL
ATMEL
ATR0849 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components