http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Agilent
Agilent

HCPL-2300 Datasheet Preview

HCPL-2300 Datasheet

(HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler

No Preview Available !

HCPL-2300 pdf
8 MBd Low Input Current
Optocoupler
Technical Data
HCPL-2300/HCPL-0300
Features
• Guaranteed Low Thresholds:
IF = 0.5 mA, VF 1.5 V
• High Speed: Guaranteed
5 MBd over Temperature
• Versatile: Compatible with
TTL, LSTTL and CMOS
• Efficient 820 nm AlGaAs LED
• Internal Shield for
Guaranteed Common Mode
Rejection
• Schottky Clamped, Open
Collector Output with
Optional Integrated Pull-Up
Resistor
• Static and Dynamic
Performance Guaranteed
from -40°C to 85°C
• Safety Approval
UL Recognized -3750 V rms for
1 minute
CSA Approved
IEC/EN/DIN EN 60747-5-2
Approved with VIORM = 630
V peak
(Option 060)
Applications
• Ground Loop Elimination
• Computer-Peripheral
Interfaces
• Level Shifting
• Microprocessor System
Interfaces
• Digital Isolation for A/D,
D/A Conversion
• RS-232-C Interface
• High Speed, Long Distance
Isolated Line Receiver
Description
The HCPL-2300/HCPL-0300
optocoupler combines an 820 nm
AlGaAs photon emitting diode
with an integrated high gain
photon detector. This
combination of Agilent designed
and manufactured semiconductor
devices brings new high
performance capabilities to
designers of isolated logic and
data communication circuits.
The new low current, high speed
AlGaAs emitter manufactured
with a unique diffused junction,
has the virtue of fast rise and fall
times at low drive currents.
Figure 6 illustrates the propaga-
tion delay vs. input current
characteristic. These unique
Functional Diagram
Schematic
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 RL
IF
+
2
VF
6 VOUT
3
5 GND
SHIELD
A 0.1 µF CAPACITOR MUST
BE CONNECTED BETWEEN
PINS 8 AND 5 (SEE NOTE 1).
1000
ICC
8 VCC
RL
7
6 VO
GND
5
TRUTH TABLE
(POSITIVE LOGIC)
LED OUTPUT
ON L
OFF
H
A 0.1 pF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
www.DataSheet4U.net



Agilent
Agilent

HCPL-2300 Datasheet Preview

HCPL-2300 Datasheet

(HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler

No Preview Available !

HCPL-2300 pdf
2
characteristics enable this device
to be used in an RS-232-C inter-
face with ground loop isolation
and improved common mode
rejection. As a line receiver, the
HCPL-2300/HCPL-0300 will
operate over longer line lengths
for a given data rate because of
lower IF and VF specifications.
The output of the shielded inte-
grated detector circuit is an open
collector Schottky clamped tran-
sistor. The shield, which shunts
capacitively coupled common
mode noise to ground, provides a
guaranteed transient immunity
specification of 100 V/µs. The
output circuit includes an
optional integrated 1000 pull-
up resistor for the open collector.
This gives designers the flexibility
to use the internal resistor for
pull-up to five volt logic or to use
an external resistor for connec-
tion to supply voltages up to 18 V
(CMOS logic voltage).
The Electrical and Switching
Characteristics of the
HCPL-2300/HCPL-0300 are
guaranteed over a temperature
range of -40°C to 85°C. This
enables the user to confidently
design a circuit which will
operate under a broad range of
operating conditions.
Ordering Information
Specify part number followed by Option Number (if desired).
HCPL-2300# XXXX
060 = IEC/EN/DIN EN 60747-5-2 VIORM = 630 V peak Option
300 = Gull Wing Surface Mount Lead Option
500 = Tape/Reel Package Option (1 K min)
XXXE = Lead Free Option
Option data sheets available. Contact your Agilent sales representative or authorized distributor for
information.
Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July
2001 and lead free option will use “-”
Package Outline Drawings
Small Outline SO-8
Package HCPL-0300
8
3.937 ± 0.127
(0.155 ± 0.005)
PIN ONE 1
0.406 ± 0.076
(0.016 ± 0.003)
765
XXX
YWW
234
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
1.270 BSC
(0.050)
LAND PATTERN RECOMMENDATION
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
* 5.080 ± 0.127
(0.200 ± 0.005)
7°
45°
X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0 ~ 7°
0.228 ± 0.025
(0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
0.203 ± 0.102
(0.008 ± 0.004)
0.305 MIN.
(0.012)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.


Part Number HCPL-2300
Description (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler
Maker Agilent
Total Page 12 Pages
PDF Download
HCPL-2300 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 HCPL-2300 8 MBd Low Input Current Optocoupler Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-2300 pdf
2 HCPL-2300 (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler Agilent
Agilent
HCPL-2300 pdf
3 HCPL-2300 (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler AVAGO TECHNOLOGIES
AVAGO TECHNOLOGIES
HCPL-2300 pdf
4 HCPL-2300060 8 MBd Low Input Current Optocoupler Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-2300060 pdf
5 HCPL-2300300 8 MBd Low Input Current Optocoupler Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-2300300 pdf
6 HCPL-2300500 8 MBd Low Input Current Optocoupler Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-2300500 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components