http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Connor-Winfield Corporation
Connor-Winfield Corporation

HSM9 Datasheet Preview

HSM9 Datasheet

5.0V Surface Mount Crystal Clock Oscillator

No Preview Available !

HSM9 pdf
www.DataSheet4U.com
22111111CCoommpprreehheennssiivvee DDrriivvee
AAuurroorraa,, IIlllliinnooiiss 6600550055
PPhhoonnee:: 663300-- 885511-- 44772222
FFaaxx:: 663300--885511--55004400
wwwwww..ccoonnwwiinn..ccoomm
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Page
Revision
Date
Sm006
1 of 2
27
07 May 2008
5.0V Surface Mount
Crystal Clock Oscillator
HSM9
XO
The Connor-Winfield HSM91, HSM92,
HSM93, and HSM94 models are
7.5mm x 5mm, 5.0V HCMOS, Surface Mount,
Fixed Frequency Crystal Oscillators (XO)
designed for use in all applications requiring
precision clocks. The RoHS compliant surface
mount package is designed for high-density
mounting and is optimum for mass
production.
Features:
1.0 to 80 MHz
5.0V Operation
RoHS Compliant
Tri-State Enable / Disable
Overall Frequency Tolerance:
HSM94 ± 20 ppm, HSM91 ± 25 ppm
HSM92 ± 50 ppm, HSM93 ± 100 ppm
Temperature Range: 0 to 70°C
Ceramic Surface Mount Package
Tape and Reel Packaging
Parameter
Storage Temperature
Supply Voltage (Vcc)
Parameter
Frequency Range (Fo)
HSM94
HSM91
HSM92
HSM93
Frequency Tolerance
HSM94
HSM91
HSM92
HSM93
Operating Temp Range
Supply Voltage (Vdd)
Supply Current (Icc)
1.0 to 31.999 MHz
32 to 49.999 MHz
50 to 80.0 MHz
Absolute Maximum Ratings
Minimum Nominal Maximum
-55 - 125
-0.5 - 7.0
Operating Specifications
Minimum Nominal Maximum
- 80
1.8
1.0
1.0
1.0
-
-20 20
-25 25
-50 50
-100
100
0 - 70
4.5 5.0 5.5
--
27
45
75
Units
°C
Vdc
Units
MHz
ppm
°C
Vdc
mA
Notes
Notes
1
Parameter
Enable Voltage - (Vih)
Disable Voltage - (Vil)
Enable Time
Disable Time
Input Characteristics
Minimum Nominal Maximum
70% Vdd
-
-
- - 30% Vdd
- - 100
- - 100
Units
Vdc
Vdc
mS
nS
Notes
2
Parameter
Load
Voltage
High (Voh)
Low (Vol)
Current
High (loh)
Low (lol)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Start-Up Time
Jitter
HCMOS Output Characteristics
Minimum Nominal Maximum
- - 50
4.5 -
-
- - 0.55
-16 -
-
- - 16
45 50 55
- -6
- - 10
- -5
Units
pF
Vdc
mA
%
nS
mS
pS RMS
Notes
Notes:
1. Inclusive of calibration @ 25°C , frequency vs temperature stability, supply voltage change, load change, shock and vibration, 10 years aging.
2. Oscillator output is enabled with no connection on pad 1
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation



Connor-Winfield Corporation
Connor-Winfield Corporation

HSM9 Datasheet Preview

HSM9 Datasheet

5.0V Surface Mount Crystal Clock Oscillator

No Preview Available !

HSM9 pdf
www.DataSheet4U.com
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630- 851- 4722
Fax: 630- 851- 5040
www.conwin.com
Package Characteristics
Package Hermetically sealed ceramic package and metal cover
Suggested Pad Layout
Environmental Characteristics
Temperature Cycle The specimen shall meet electrical characteristics after
tested 5 cycles of -55°C / 30 minutes and +125°C / 30 minutes
Hermetical No bubbles appear in Flourinert (FC-43) at 125°C ±5°C for 5 minutes
Solvent Resistance Marking will withstand immersion in
Isopropyl Alcohol or Trichloroethylene
Soldering
General Conditions 260°C max x 10 sec max x 2 times max or
230°C max x 180 sec max x 1 time
Typical Operation Data
(Vapor phase reflow)
20 to 100 sec up to 215°C, 50 sec
at 215°C, then down to room temperature per 1 to 5°C / sec
Free Drop
Mechanical Characteristics
The specimen shall meet electrical characteristics after tested 3 times,
Free Drop testing on the hard wooden board from a height of 75 cm.
Vibration
The specimen shall meet electrical characteristics after tested
by the following conditions: 10-55Hz 1.5mm Amplitude,
55-2000 Hz 20 G's, 2 hours for each plane
Thermal Shock
After applied Thermal Shock of 260°C
max x 10 sec max x 2 times, or 230°C max x 180 sec max,
the specimen shall meet electrical characteristics
Solderability
(EIAJ-RCX-0102.101 Condition 1a)
1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%)
2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%)
3) Solder bath temperature: 235°C ±5°C
4) Depth of immersion: Up to electrical terminal
5) Immersing time: Within 2 sec ±0.5 sec into solder bath
After performing the above procedures, a newly soldered coverage shall be greater than 90%
Bypass capacitor, C-by, should be
ceramic capacitor .01 uf
Vcc
POWER
SUPPLY
Test Circuit
OSCILLOSCOPE
PROBE
.01uf OSC
INPUT FOR E/D
FREQ
COUNTER
Output Waveform
Pin Connections
1: Tri-State E/D
2: Ground
3: Output
4: VDD
SYMMETRY
Tape and Reel Dimensions
Ordering Information
HSM91 - 050.0M
CLOCK
SERIES
CENTER
FREQUENCY
Dimensional Tolerance: ±.02" (.508mm)
± . 0 0 5 " (.127mm)
Meets EIA-481A and EIAJ-1009B
2,000 PCS/Reel
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation
Bulletin
Page
Revision
Date
Sm006
2 of 2
27
07 May 2008


Part Number HSM9
Description 5.0V Surface Mount Crystal Clock Oscillator
Maker Connor-Winfield Corporation
Total Page 2 Pages
PDF Download
HSM9 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 HSM101 SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER (VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere) Rectron Semiconductor
Rectron Semiconductor
HSM101 pdf
2 HSM101 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT HIGH EFFICIENCY RECTIFIER Dc Components
Dc Components
HSM101 pdf
3 HSM102 SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER (VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere) Rectron Semiconductor
Rectron Semiconductor
HSM102 pdf
4 HSM102 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT HIGH EFFICIENCY RECTIFIER Dc Components
Dc Components
HSM102 pdf
5 HSM103 SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER (VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere) Rectron Semiconductor
Rectron Semiconductor
HSM103 pdf
6 HSM103 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT HIGH EFFICIENCY RECTIFIER Dc Components
Dc Components
HSM103 pdf
7 HSM104 SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER (VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere) Rectron Semiconductor
Rectron Semiconductor
HSM104 pdf
8 HSM104 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT HIGH EFFICIENCY RECTIFIER Dc Components
Dc Components
HSM104 pdf
9 HSM105 SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER (VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere) Rectron Semiconductor
Rectron Semiconductor
HSM105 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components