1.20 2.54 0.5
These devices are single channel optocouplers. The channel is composed of a Gallium Arsenide infra-red
emitting diode and a silicon phototransistor. Package styles for these devices are 4 pin with surface mount, butt
cut and gull wing options available.
The same electrical die, assembly processes and materials are used for each channel of each device shown
below. Therefore absolute maximum ratings, recommended operating conditions, electrical specifications and
performance characteristics are identical for all units. Any exceptions, due to packaging variations and
limitations, are as noted.
Isocom Ltd supplies a multitude of plastic
optocouplers for all applications varying from
standard transistor optos through to Darlington and
Schmitt Trigger devices. It’s massive family of optos
vary in speed allowing maximum opportunity to
All devices are performance guaranteed between -
20ºC and +80ºC and have completed rigorous testing.
The Company's customers can be assured of our
commitment to stringent quality, reliability and
inspection standards, as demonstrated by our existing
approvals. Other customer specific options can also be
Manufactured and tested in BS9000 and CECC20000 approved premises
High current transfer ratio
7500V electrical isolation
Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use.
Isocom Ltd cannot accept liability for any errors or omissions.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email Isocom@isocomoptocouplers.com
Or go to the Isocom Website @: Http://www.isocom.uk.com