http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Intel
Intel

E28F010 Datasheet Preview

E28F010 Datasheet

1024K (128K x 8) CMOS FLASH MEMORY

No Preview Available !

E28F010 pdf
E
28F010 1024K (128K X 8) CMOS
FLASH MEMORY
8
n Flash Electrical Chip-Erase
1 Second Typical Chip-Erase
n Quick-Pulse Programming Algorithm
10 µs Typical Byte-Program
2 Second Chip-Program
n 100,000 Erase/Program Cycles
n 12.0 V ±5% VPP
n High-Performance Read
90 ns Maximum Access Time
n CMOS Low Power Consumption
10 mA Typical Active Current
50 µA Typical Standby Current
0 Watts Data Retention Power
n Integrated Program/Erase Stop Timer
n Command Register Architecture for
Microprocessor/Microcontroller
Compatible Write Interface
n Noise Immunity Features
±10% VCC Tolerance
Maximum Latch-Up Immunity
through EPI Processing
n ETOX™ Nonvolatile Flash Technology
EPROM-Compatible Process Base
High-Volume Manufacturing
Experience
n JEDEC-Standard Pinouts
32-Pin Plastic Dip
32-Lead PLCC
32-Lead TSOP
(See Packaging Spec., Order #231369)
n Extended Temperature Options
Intel’s 28F010 CMOS flash memory offers the most cost-effective and reliable alternative for read/write
random access nonvolatile memory. The 28F010 adds electrical chip-erasure and reprogramming to familiar
EPROM technology. Memory contents can be rewritten: in a test socket; in a PROM-programmer socket; on-
board during subassembly test; in-system during final test; and in-system after sale. The 28F010 increases
memory flexibility, while contributing to time and cost savings.
The 28F010 is a 1024 kilobit nonvolatile memory organized as 131,072 bytes of eight bits. Intel’s 28F010 is
offered in 32-pin plastic dip or 32-lead PLCC and TSOP packages. Pin assignments conform to JEDEC
standards for byte-wide EPROMs.
Extended erase and program cycling capability is designed into Intel's ETOX™ (EPROM Tunnel Oxide)
process technology. Advanced oxide processing, an optimized tunneling structure, and lower electric field
combine to extend reliable cycling beyond that of traditional EEPROMs. With the 12.0 V VPP supply, the
28F010 performs 100,000 erase and program cycles—well within the time limits of the quick-pulse
programming and quick-erase algorithms.
Intel's 28F010 employs advanced CMOS circuitry for systems requiring high-performance access speeds,
low power consumption, and immunity to noise. Its 90 ns access time provides zero wait-state performance
for a wide range of microprocessors and microcontrollers. Maximum standby current of 100 µA translates into
power savings when the device is deselected. Finally, the highest degree of latch-up protection is achieved
through Intel's unique EPI processing. Prevention of latch-up is provided for stresses up to 100 mA on
address and data pins, from –1 V to VCC + 1 V.
With Intel's ETOX process technology base, the 28F010 builds on years of EPROM experience to yield the
highest levels of quality, reliability, and cost-effectiveness.
December 1997
Order Number: 290207-012



Intel
Intel

E28F010 Datasheet Preview

E28F010 Datasheet

1024K (128K x 8) CMOS FLASH MEMORY

No Preview Available !

E28F010 pdf
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of
Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or
infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life
saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
The 28F010 may contain design defects or errors known as errata. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be
obtained from:
Intel Corporation
P.O. Box 5937
Denver, CO 80217-9808
or call 1-800-548-4725
or visit Intel’s website at http://www.intel.com
Copyright © Intel Corporation 1996, 1997.
* Third-party brands and names are the property of their respective owners.


Part Number E28F010
Description 1024K (128K x 8) CMOS FLASH MEMORY
Maker Intel
Total Page 30 Pages
PDF Download
E28F010 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 E28F010 1024K (128K x 8) CMOS FLASH MEMORY Intel
Intel
E28F010 pdf
2 E28F016S3 SMART 3 FlashFile MEMORY Intel
Intel
E28F016S3 pdf
3 E28F016S5 SMART 5 FlashFile MEMORY Intel
Intel
E28F016S5 pdf
4 E28F016SC SmartVoltage FlashFile MEMORY Intel
Intel
E28F016SC pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components