http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Intersil Electronic Components Datasheet

ISL55036 Datasheet

400MHz Slew Rate Enhanced Rail-to-Rail Output Gain Block

No Preview Available !

ISL55036 pdf
NOc1NTo-8nOR8taE8Rc-CEItNOCoTMOuErMMRTDMESeaNIEcLthDNaonEDSriDcEhwaDFelweOSRwtRuE.ipPnNpLtEeoArWrsCt iCElD.ceMEonSEmtIeNG/rTtNsacSt September 11, 2008
ISL55036
FN6640.1
400MHz Slew Rate Enhanced Rail-to-Rail
Output Gain Block
The ISL55036 is a hex, rail-to-rail output, fixed gain amplifier
(G = 4) with a -3dB bandwidth of 400MHz and slew rate of
2500V/µs into a 150Ω load. The ISL55036 features single
supply operation over a voltage range of 3VDC to 5.5VDC.
The inputs are capable of sensing ground with an output
swing of VCC - 0.3V into a 150Ω load tied to V+/2. The part
includes a fast-acting global disable/power-down circuit.
The ISL55036 is available in a 24 Ld TQFN package.
Operation is specified over the -40°C to +85°C temperature
range.
Features
• 400MHz -3dB Bandwidth
• 2500V/µs Typical Slew Rate, RL = 150Ω
• Supplies from 3V to 5.5V
• Rail-to-Rail Output (RL = 1k)
• Input Ground Sensing
• Fast 25ns Disable
• Low Cost
• Pb-Free (RoHS Compliant)
Ordering Information
PART NUMBER
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL55036IRTZ
55036 IRTZ 24 Ld TQFN L24.4x5C
ISL55036IRTZ-T13* 55036 IRTZ 24 Ld TQFN L24.4x5C
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Applications
• Video RGB Line Driver
• LCD Based Projectors Pixel Control
Pinout
ISL55036
24 LD TQFN
TOP VIEW
24 23 22 21 20
IN+_2 1
19 OUT_2
0.80
0.75
0.70
0.65
0.60
0.55
0.50
V+ = 5V
AV = +4
RL = 150Ω
CL = 3.0pF
VOUT = 250mVP-P
IN+_3 2
GND_IN(1, 2, 3) 3
EN(4, 5, 6) 4
V+(4, 5, 6) 5
IN+_4 6
IN+_5 7
DIE 1
DIE 2
18 OUT_3
17 GND_OUT(1, 2, 3)
16 GND_PWR(1, 2, 3)
15 V+_OUT(4,5,6)
14 OUT_4
13 OUT_5
8 9 10 11 12
0.45 0 5 10 15 20 25 30 35 40 45
TIME (ns)
FIGURE 1. SMALL SIGNAL STEP RESPONSE
50
AV EACH CHANNEL
EQUALS +4
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.


Intersil Electronic Components Datasheet

ISL55036 Datasheet

400MHz Slew Rate Enhanced Rail-to-Rail Output Gain Block

No Preview Available !

ISL55036 pdf
ISL55036
Pin Descriptions
24 LD TQFN
1
2
3
4
PIN NAME
IN+_2
IN+_3
GND_IN(1, 2, 3)
EN(4, 5, 6)
5 V+(4, 5, 6)
6 IN+_4
7 IN+_5
8 IN+_6
9 GND_IN(4, 5, 6)
10 GND_PWR(4, 5, 6)
11 GND_OUT(4, 5, 6)
12 OUT_ 6
13 OUT_ 5
14 OUT_4
15 V+_OUT(4, 5, 6)
16 GND_PWR(1, 2, 3)
17 GND_OUT(1, 2, 3)
18 OUT_3
19 OUT_2
20 OUT_1
21 V+_OUT(1, 2, 3)
22 EN(1, 2, 3)
23 V+(1, 2, 3)
24 IN+_1
Thermal Pad
EQUIVALENT
CIRCUIT
Circuit 1
Circuit 1
Circuit 4
Circuit 2
Circuit 5
Circuit 1
Circuit 1
Circuit 1
Circuit 5
Circuit 5
Circuit 3
Circuit 3
Circuit 3
Circuit 3
Circuit 3
Circuit 4
Circuit 3
Circuit 3
Circuit 3
Circuit 3
Circuit 3
Circuit 2
Circuit 4
Circuit 1
Circuit 6
DESCRIPTION
Amplifier 2 non-inverting input
Amplifier 3 non-inverting input
Common reference input for Amplifiers 1, 2, 3
Enable pin internal pull-down; Logic “1” selects the disabled state; Logic “0” selects
the enabled state. Channels 4, 5, 6
Positive power supply for Channels 4, 5, 6.
Amplifier 4 non-inverting input
Amplifier 5 non-inverting input
Amplifier 6 non-inverting input
Common reference input for Amplifiers 4, 5, 6
Power supply ground for Channels 4, 5, 6.
Output power supply ground for Channels 4, 5, 6.
Amplifier 6 output
Amplifier 5 output
Amplifier 4 output
Output power supply for Channels 4, 5, 6.
Power supply ground Channels 1, 2, 3.
Output power supply ground Channels 1, 2, 3.
Amplifier 3 output
Amplifier 2 output
Amplifier 1 output
Output power supply Channels 1, 2, 3.
Enable pin internal pull-down; Logic “1” selects the disabled state; Logic “0” selects
the enabled state. Channels 1, 2, 3
Positive power supply for Channels 1, 2, 3.
Amplifier 1 non-inverting input
Thermal heat sink pad makes electrical contact the IC substrate and must be
connected to same ground potential as the ground pins.
V+ V+
IN+ dv/dt
CLAMP
EN
21k +
1.2V -
GND_PWR
GND_PWR
V+_OUT(1, 2, 3)
V+_OUT(4, 5, 6)
OUT(1, 2, 3)
OUT(4, 5, 6)
GND_OUT(1, 2, 3)
GND_OUT(4, 5, 6)
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
GND_IN-(1,2,3)
500
V+(1, 2, 3)
GND_IN-(4, 5, 6)
500
V+(4,5,6)
SUBSTRATE 1
GND_PWR (1,2,3)
SUBSTRATE 2
~1MΩ ~1MΩ GND(4, 5, 6)
GND_PWR(1,2,3)
CIRCUIT 4
1.5k
GND_PWR(4, 5, 6)
1.5k
CIRCUIT 5
THERMAL HEAT SINK PAD
CIRCUIT 6
2 FN6640.1
September 11, 2008


Part Number ISL55036
Description 400MHz Slew Rate Enhanced Rail-to-Rail Output Gain Block
Maker Intersil
Total Page 11 Pages
PDF Download
ISL55036 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 ISL55033 Rail-to-Rail Output Gain Block Intersil
Intersil
ISL55033 pdf
2 ISL55036 400MHz Slew Rate Enhanced Rail-to-Rail Output Gain Block Intersil
Intersil
ISL55036 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components