EL7640A, EL7641A, EL7642A
May 15, 2006
TFT-LCD DC/DC with Integrated
The EL7640A, EL7641A, and EL7642A integrate a high
performance boost regulator with 2 LDO controllers for VON
and VOFF, a VON-slice circuit with adjustable delay and
either one (EL7640A), three (EL7641A), or five amplifiers
(EL7642A) for VCOM and VGAMMA applications.
The boost converter in the EL7640A, EL7641A, and
EL7642A is a current mode PWM type integrating an 18V
NHchannel MOSFET. Operating at 1.2MHz, this boost can
operate in either P-mode for superior transient response, or
in PI-mode for tighter output regulation.
Using external low-cost transistors, the LDO controllers
provide tight regulation for VON, VOFF, as well as providing
start-up sequence control and fault protection.
The amplifiers are ideal for VCOM and VGAMMA
applications, with 150mA peak output current drive, 12MHz
bandwidth, and 12V/µs slew rate. All inputs and outputs are
Available in the 32 Ld thin QFN (5mm x 5mm) Pb-free
packages, the EL7640A, EL7641A, and EL7642A are specified
for operation over the -40°C to +85°C temperature range.
PART NUMBER PART TAPE & PACKAGE PKG.
MARKING REEL (Pb-Free) DWG. #
7640AILTZ - 32 Ld 5x5 MDP0051
EL7640AILTZ-T7 7640AILTZ 7” 32 Ld 5x5 MDP0051
EL7640AILTZ-T13 7640AILTZ 13” 32 Ld 5x5 MDP0051
7641AILTZ - 32 Ld 5x5 MDP0051
EL7641AILTZ-T7 7641AILTZ 7” 32 Ld 5x5 MDP0051
EL7641AILTZ-T13 7641AILTZ 13” 32 Ld 5x5 MDP0051
7642AILTZ - 32 Ld 5x5 MDP0051
EL7642AILTZ-T7 7642AILTZ 7” 32 Ld 5x5 MDP0051
EL7642AILTZ-T13 7642AILTZ 13” 32 Ld 5x5 MDP0051
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb
and Pb-free soldering operations. Intersil Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements
of IPC/JEDEC J STD-020.
• Current mode boost regulator
- Fast transient response
- 1% accurate output voltage
- 18V/3A integrated FET
- >90% efficiency
• 2.6V to 5.5V VIN supply
• 2 LDO controllers for VON and VOFF
- 2% output regulation
- VON-slice circuit
• High speed amplifiers
- 150mA short-circuit output current
- 12V/µs slew rate
- 12MHz -3dB bandwidth
- Rail-to-rail inputs and outputs
• Built-in power sequencing
• Internal soft-start
• Multiple overload protection
• Thermal shutdown
• 32 Ld 5x5 thin QFN package
• Pb-free plus anneal available (RoHS compliant)
• TFT-LCD panels
• LCD monitors
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.