http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





KODENSHI KOREA
KODENSHI KOREA

KK4502B Datasheet Preview

KK4502B Datasheet

Strobed Hex Inverter/Buffer High-Voltage Silicon-Gate CMOS

No Preview Available !

KK4502B pdf
www.DataSheet4U.com
Strobed Hex Inverter/Buffer
High-Voltage Silicon-Gate CMOS
TECHNICAL DATA
KK4502B
The KK4502B consists of six inverter/buffers with 3-state outputs. A
logic “1” on the OUTPUT ENABLE input produces a high impedance
state in all six outputs. This feature permits common busing of the
outputs, thus simplifying system design. A logic “1” on the DIRECTION
input switches all six outputs to logic “0” if the OUTPUT ENABLE input
is a logic “0”.
Operating Voltage Range: 3.0 to 18 V
Maximum input current of 1 µA at 18 V over full package-temperature
range; 100 nA at 18 V and 25°C
Noise margin (over full package temperature range):
1.0 V min @ 5.0 V supply
2.0 V min @ 10.0 V supply
2.5 V min @ 15.0 V supply
ORDERING INFORMATION
KK4502BN Plastic
KK4502BD SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 16=VCC
PIN 8= GND
FUNCTION TABLE
Inputs
Output Direction
Enable
LL
LL
LH
HX
Z = high impedance
X = don’t care
Output
AY
LH
HL
XL
XZ
1



KODENSHI KOREA
KODENSHI KOREA

KK4502B Datasheet Preview

KK4502B Datasheet

Strobed Hex Inverter/Buffer High-Voltage Silicon-Gate CMOS

No Preview Available !

KK4502B pdf
www.DataSheet4U.com
KK4502B
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +20
-0.5 to VCC +0.5
-0.5 to VCC +0.5
±10
750
500
PD Power Dissipation per Output Transistor
Tstg Storage Temperature
100
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mW
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VIN, VOUT
TA
Parameter
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
Operating Temperature, All Package Types
Min Max Unit
3.0 18
V
0 VCC V
-55 +125
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2


Part Number KK4502B
Description Strobed Hex Inverter/Buffer High-Voltage Silicon-Gate CMOS
Maker KODENSHI KOREA
Total Page 6 Pages
PDF Download
KK4502B pdf
Download PDF File
KK4502B pdf
View for Mobile



Buy Electronic Components




Related Datasheet

1 KK4502B Strobed Hex Inverter/Buffer High-Voltage Silicon-Gate CMOS KODENSHI KOREA
KODENSHI KOREA
KK4502B pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components