http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX9583 Datasheet

(MAX9583 - MAX9585) Standard-Definition Video Filter Amplifiers

No Preview Available !

MAX9583 pdf
www.DataSheet4U.com
19-0817; Rev 1; 6/07
EVAALVUAAILTAIOBNLEKIT
Dual, Triple, and Quad Standard-Definition Video
Filter Amplifiers with DC-Coupled Input Buffers
General Description
The MAX9583/MAX9584/MAX9585 are small, low-power,
multichannel video amplifiers with integrated reconstruc-
tion filters. Specially suited for standard-definition video
signals, these devices are ideal for a wide range of
television, set-top box, and portable applications.
The MAX9583/MAX9584/MAX9585 inputs can be
directly connected to the outputs of a video digital-to-
analog converter (DAC). The reconstruction filter typical-
ly has ±1dB passband flatness at 7MHz and 40dB
attenuation at 27MHz. The amplifiers have a 2V/V gain
and the outputs can be DC-coupled to a 75load which
is the equivalent of two video loads, or AC-coupled to a
150load.
The MAX9583/MAX9584/MAX9585 operate from a 2.7V to
3.6V single supply and are specified over the -40°C to
+125°C automotive temperature range. The MAX9583 is
offered in a small, 6-pin thin SOT23 package. The
MAX9584 is offered in a small, 8-pin µMAX® package,
and the MAX9585 is offered in a small, 10-pin µMAX
package.
Applications
Set-Top Boxes
Televisions
Portable
Pin Configurations and Selector Guide located at end of
data sheet.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Features
Dual- (MAX9583), Triple- (MAX9584),
and Quad- (MAX9585) Channel Devices
7MHz, ±1dB Passband
40dB Attenuation at 27MHz
Fixed Gain of 2V/V
Low Power: 3.5mA per Channel
2.7V to 3.6V Single-Supply Operation
Small SOT23 and µMAX Packages
Ordering Information
PART
PIN-PACKAGE CHANNELS
PKG
CODE
MAX9583AZT+T* 6 Thin SOT23-6
2
Z6+1
MAX9583ALT+T* 6 µDFN-6
2 L622+1
MAX9584AUA+T 8 µMAX-8
3 U8+1
MAX9584ALA+T* 8 µDFN-8
3 L822+1
MAX9585AUB+T 10 µMAX-10
4 U10+2
MAX9585ATC+* 12 TQFN-EP**
4 T1233+4
Note: All devices are specified over the -40°C to +125°C operat-
ing temperature range.
+Denotes a lead-free package.
T = Tape and reel.
*Future product—contact factory for availability.
**EP = Exposed paddle.
Block Diagrams
0
TO
50mV
BUFFER
INA
BUFFER
INB
BUFFER
INC
MAX9584
LPF
LPF
LPF
AV = 2V/V
300mV
TO 400mV
OUTA
AV = 2V/V
OUTB
AV = 2V/V
OUTC
Block Diagrams continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX9583 Datasheet

(MAX9583 - MAX9585) Standard-Definition Video Filter Amplifiers

No Preview Available !

MAX9583 pdf
www.DataSheet4U.com
Dual, Triple, and Quad Standard-Definition Video
Filter Amplifiers with DC-Coupled Input Buffers
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +4V
IN_ to GND ...............................................................-0.3V to +4V
OUT_ Short-Circuit Duration to VDD, GND .................Continuous
Continuous Input Current
IN_ ................................................................................±20mA
Continuous Power Dissipation (TA = +70°C)
6-Pin Thin SOT23 (derate 9.1mW/°C above +70°C) ....727mW
6-Pin µDFN (derate 4.5mW/°C above +70°C) .............358mW
8-Pin µMAX (derate 4.5mW/°C above +70°C) .............362mW
8-Pin µDFN (derate 4.8mW/°C above +70°C) .............381mW
10-Pin µMAX (derate 5.6mW/°C above +70°C) ...........444mW
12-Pin, 3mm x 3mm TQFN (derate 14.7mW/°C
above +70°C).............................................................1177mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = 3.3V, GND = 0V, RL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C) (Note 1)
PARAMETER
Supply Voltage Range
Supply Current
Input Voltage Range
Input Current
Input Resistance
DC Voltage Gain (Note 2)
DC Gain Matching
Output Level
Output-Voltage Swing
Output Short-Circuit
Current
Output Resistance
Power-Supply Rejection
Ratio
SYMBOL
VDD
IDD
VIN
IIN
RIN
Av
ROUT
PSRR
CONDITIONS
Guaranteed by PSRR
Per channel
Guaranteed by DC
voltage gain
VDD = 2.7V
VDD = 3V
VIN = 0V
RL = 150to GND
VDD = 2.7V,
0V VIN 1.05V
VDD = 3V,
0V VIN 1.2V
Guaranteed by DC voltage gain
Measured at VOUT, VIN = 0V, RL = 150to GND
Measured at output, VDD = 2.7V, 0V VIN 1.05V,
RL = 150to -0.2V
Measured at output, VDD = 2.7V, 0V VIN 1.05V,
RL = 150to VDD/2
Measured at output, VDD = 3V, 0V VIN 1. 2V,
RL = 150to -0.2V
Measured at output, VDD = 3V, 0V VIN 1. 2V,
RL = 150to VDD/2
Measured at output, VDD = 3.135V, 0V VIN 1.05V,
RL = 75to -0.2V
Short to GND (sourcing)
Short to VDD (sinking)
VOUT = 1.5V, -10mA ILOAD 10mA
2.7V VDD 3.6V
f = 1MHz, 100mVP-P
MIN
2.7
0
0
1.96
1.96
-2
0.210
48
TYP
3.5
0.6
25
2
2
0
0.300
2.1
2.1
2.4
2.4
2.1
140
70
0.2
29
MAX
3.6
7
1.05
1.2
10
2.04
2.04
+2
0.410
UNITS
V
mA
VP-P
µA
M
V/V
%
V
VP-P
mA
dB
2 _______________________________________________________________________________________


Part Number MAX9583
Description (MAX9583 - MAX9585) Standard-Definition Video Filter Amplifiers
Maker Maxim Integrated Products
Total Page 20 Pages
PDF Download
MAX9583 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 MAX9583 (MAX9583 - MAX9585) Standard-Definition Video Filter Amplifiers Maxim Integrated Products
Maxim Integrated Products
MAX9583 pdf
2 MAX9584 (MAX9583 - MAX9585) Standard-Definition Video Filter Amplifiers Maxim Integrated Products
Maxim Integrated Products
MAX9584 pdf
3 MAX9585 (MAX9583 - MAX9585) Standard-Definition Video Filter Amplifiers Maxim Integrated Products
Maxim Integrated Products
MAX9585 pdf
4 MAX9586 (MAX9586 - MAX9589) Standard-Definition Video Filter Amplifiers Maxim Integrated Products
Maxim Integrated Products
MAX9586 pdf
5 MAX9587 (MAX9586 - MAX9589) Standard-Definition Video Filter Amplifiers Maxim Integrated Products
Maxim Integrated Products
MAX9587 pdf
6 MAX9588 (MAX9586 - MAX9589) Standard-Definition Video Filter Amplifiers Maxim Integrated Products
Maxim Integrated Products
MAX9588 pdf
7 MAX9589 (MAX9586 - MAX9589) Standard-Definition Video Filter Amplifiers Maxim Integrated Products
Maxim Integrated Products
MAX9589 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components