http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Micron Technology
Micron Technology

MT29F1G08ABADAWP Datasheet Preview

MT29F1G08ABADAWP Datasheet

NAND Flash Memory

No Preview Available !

MT29F1G08ABADAWP pdf
Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
NAND Flash Memory
MT29F1G08ABADAWP, MT29F1G08ABBDAH4,
MT29F1G08ABBDAHC, MT29F1G16ABBDAH4,
MT29F1G16ABBDAHC, MT29F1G08ABADAH4
Features
Open NAND Flash Interface (ONFI) 1.0-compliant1
Single-level cell (SLC) technology
Organization
Page size x8: 2112 bytes (2048 + 64 bytes)
Page size x16: 1056 words (1024 + 32 words)
Block size: 64 pages (128K + 4K bytes)
Device size: 1Gb: 1024 blocks
Asynchronous I/O performance
tRC/tWC: 20ns (3.3V), 25ns (1.8V)
Array performance
Read page: 25µs3
Program page: 200µs (TYP, 3.3V and 1.8V)3
Erase block: 700µs (TYP)
Command set: ONFI NAND Flash Protocol
Advanced command set
Program page cache mode5
Read page cache mode5
One-time programmable (OTP) mode
Read unique ID
Internal data move
Operation status byte provides software method for
detecting
Operation completion
Pass/fail condition
Write-protect status
Internal data move operations supported within the
device from which data is read
Ready/busy# (R/B#) signal provides a hardware
method for detecting operation completion
WP# signal: write protect entire device
First block (block address 00h) is valid when ship-
ped from factory with ECC. For minimum required
ECC, see Error Management.
Block 0 requires 1-bit ECC if PROGRAM/ERASE cy-
cles are less than 1000
RESET (FFh) required as first command after power-
on
Alternate method of device initialization (Nand_In-
it) after power up4 (contact factory)
Quality and reliability
Data retention: 10 years
Operating Voltage Range
VCC: 2.7–3.6V
VCC: 1.7–1.95V
Operating temperature:
Commercial: 0°C to +70°C
Extended (ET): –40ºC to +85ºC
Package
48-pin TSOP type 1, CPL2
63-ball VFBGA
Notes:
1. The ONFI 1.0 specification is available at
www.onfi.org.
2. CPL = Center parting line.
3. See Electrical Specifications for tR_ECC and
tPROG_ECC specifications.
4. Available only in the 1.8V VFBGA package.
5. Supported only with ECC disabled.
PDF: 09005aef83e5ffed
m68a.pdf – Rev. D 06/10 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.



Micron Technology
Micron Technology

MT29F1G08ABADAWP Datasheet Preview

MT29F1G08ABADAWP Datasheet

NAND Flash Memory

No Preview Available !

MT29F1G08ABADAWP pdf
Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
Part Numbering Information
Micron NAND Flash devices are available in different configurations and densities. Verify valid part numbers by
using Micron’s part catalog search at www.micron.com. To compare features and specifications by device type,
visit www.micron.com/products. Contact the factory for devices not found.
Figure 1: Marketing Part Number Chart
MT 29F 1G 08 A B B D A HC xx xx x ES :D
Micron Technology
Product Family
29F = NAND Flash memory
Density
1G = 1Gb
Device Width
08 = 8-bit
16 = 16-bit
Level
A= SLC
Classification
Mark Die nCE RnB I/O Channels
B1
11
1
Operating Voltage Range
A = 3.3V (2.7–3.6V)
B = 1.8V (1.7–1.95V)
Feature Set
D = Feature set D
Design Revision (shrink)
Production Status
Blank = Production
ES = Engineering sample
MS = Mechanical sample
QS = Qualification sample
Reserved for Future Use
Blank
Operating Temperature Range
Blank = Commercial (0°C to +70°C)
IT = Industrial (–40°C to +85°C)
Speed Grade
Blank
Package Code
WP = 48-pin TSOP 1
HC = 63-ball VFBGA (10.5 x 13 x 1.0mm)
H4 = 63-ball VFBGA (9 x 11 x 1.0mm)
Interface
A = Async only
PDF: 09005aef83e5ffed
m68a.pdf – Rev. D 06/10 EN
2 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.


Part Number MT29F1G08ABADAWP
Description NAND Flash Memory
Maker Micron Technology
Total Page 30 Pages
PDF Download
MT29F1G08ABADAWP pdf
Download PDF File


Buy Electronic Components




Related Datasheet

1 MT29F1G08ABADAWP NAND Flash Memory Micron Technology
Micron Technology
MT29F1G08ABADAWP pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components