http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Micron Technology
Micron Technology

MT29F1G08ABCH4 Datasheet Preview

MT29F1G08ABCH4 Datasheet

NAND Flash Memory

No Preview Available !

MT29F1G08ABCH4 pdf
www.DataSheet.co.kr
Micron Confidential and Proprietary
1Gb: x8, x16 NAND Flash Memory
Features
NAND Flash Memory
MT29F1G08AACWP, MT29F1G08AACH4
MT29F1G08ABCHC, MT29F1G16ABCHC,
MT29F1G08ABCH4, MT29F1G16ABCH4
Features
Open NAND Flash Interface (ONFI) 1.0-compliant1
Single-level cell (SLC) technology
Organization
Page size x8: 2112 bytes (2048 + 64 bytes)
Page size x16: 1056 words (1024 + 32 words)
Block size: 64 pages (128K + 4K bytes)
Device size: 1Gb: 1024 blocks
Asynchronous I/O performance
tRC/tWC: 25ns (3.3V), 35ns (1.8V)
Array performance
Read page: 25µs
Program page: 250µs (TYP, 3.3V)
Program page: 250µs (TYP, 1.8V)
Erase block: 500µs (TYP)
Command set: ONFI NAND Flash Protocol
Advanced command set
Program cache
Read cache sequential
Read cache random
One-time programmable (OTP) mode
Block lock (1.8V only)
Boot block (1.8V only)
Programmable drive strength
Read unique ID
Internal data move
Operation status byte provides software method for
detecting
Operation completion
Pass/fail condition
Write-protect status
Internal data move operations supported within the
device from which data is read
Ready/busy# (R/B#) signal provides a hardware
method for detecting operation completion
WP# signal: write protect entire device
Blocks 0–7 (block address 00h-07h) guaranteed to
be valid with ECC when shipped from factory (3.3V
only); see Error Management (page 83).
Blocks 0–3 (block address 00h-03h) guaranteed to
be valid with ECC when shipped from factory (1.8V
only); see Error Management (page 83).
RESET (FFh) required as first command after power-
on
Alternate method of device initialization (Nand_In-
it) after power up3 (contact factory)
Quality and reliability
Data retention: 10 years
Endurance: 100,000 PROGRAM/ERASE cycles
Operating Voltage Range
VCC: 2.7–3.6V
VCC: 1.65–1.95V
Operating temperature:
Commercial: 0°C to +70°C
Extended (ET): –40ºC to +85ºC
Package
48-pin TSOP type 1, CPL2
63-ball VFBGA
Notes:
1. The ONFI 1.0 specification is available at
www.onfi.org.
2. CPL = Center parting line.
3. Available only in 1.8V VFBGA package.
PDF:09005aef83c2e425
1gb_nand_m58a.pdf – Rev. D 1/10 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2008 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
Datasheet pdf - http://www.DataSheet4U.net/



Micron Technology
Micron Technology

MT29F1G08ABCH4 Datasheet Preview

MT29F1G08ABCH4 Datasheet

NAND Flash Memory

No Preview Available !

MT29F1G08ABCH4 pdf
www.DataSheet.co.kr
Micron Confidential and Proprietary
1Gb: x8, x16 NAND Flash Memory
Features
Part Numbering Information
Micron NAND Flash devices are available in different configurations and densities. Verify valid part numbers by
using Micron’s part catalog search at www.micron.com. To compare features and specifications by device type,
visit www.micron.com/products. Contact the factory for devices not found.
Figure 1: Marketing Part Number Chart
MT 29F 1G 08 A A C HC
ES :C
Micron Technology
Single-Supply NAND Flash
29F = Single-supply NAND Flash memory
Density
1G = 1Gb
Device Width
08 = 8 bits
16 = 16 bits
Classification
# of die # of CE# # of R/B# I/O
A1
1
1 Common
Operating Voltage Range
A = 3.3V (2.7–3.6V)
B = 1.8V (1.65–1.95V)
Feature Set
C = Feature set C
Design Revision
C = Third revision
Production Status
Blank = Production
ES = Engineering sample
MS = Mechanical sample
QS = Qualification sample
Operating Temperature Range
Blank = Commercial (0°C to +70°C)
ET = Extended (–40C to +85°C)
Reserved for Future Use
Blank
NAND Flash Performance
Blank = Standard
Package Code
WP = 48-pin TSOP CPL
HC = 63-ball VFBGA (10.5mm x 13mm x 1.0mm)
H4 = 63-ball VFBGA (9mm x 11mm x 1.0mm)
PDF:09005aef83c2e425
1gb_nand_m58a.pdf – Rev. D 1/10 EN
2 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2008 Micron Technology, Inc. All rights reserved.
Datasheet pdf - http://www.DataSheet4U.net/


Part Number MT29F1G08ABCH4
Description NAND Flash Memory
Maker Micron Technology
Total Page 30 Pages
PDF Download
MT29F1G08ABCH4 pdf
Download PDF File


Buy Electronic Components




Related Datasheet

1 MT29F1G08ABCH4 NAND Flash Memory Micron Technology
Micron Technology
MT29F1G08ABCH4 pdf
2 MT29F1G08ABCHC NAND Flash Memory Micron Technology
Micron Technology
MT29F1G08ABCHC pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components