http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




  ON Semiconductor Electronic Components Datasheet  

NRVB1H100SFT3G Datasheet

Surface Mount Schottky Power Rectifier

No Preview Available !

NRVB1H100SFT3G pdf
MBR1H100SFT3G,
NRVB1H100SFT3G
Surface Mount
Schottky Power Rectifier
Plastic SOD−123FL Package
This device uses the Schottky Barrier principle with a large area
metal−to−silicon power diode. Ideally suited for low voltage, high
frequency rectification or as free wheeling and polarity protection
diodes in surface mount applications where compact size and weight
are critical to the system. Because of its small size, it is ideal for use in
portable and battery powered products such as cellular and cordless
phones, chargers, notebook computers, printers, PDAs and PCMCIA
cards. Typical applications are AC−DC and DC−DC converters,
reverse battery protection, and “Oring” of multiple supply voltages
and any other application where performance and size are critical.
Features
Guardring for Stress Protection
Low Forward Voltage
175°C Operating Junction Temperature
Epoxy Meets UL 94 V−0
Package Designed for Optimal Automated Board Assembly
ESD Ratings: Machine Model, C
Human Body Model, 3B
NRVB Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Mechanical Characteristics
Reel Options: MBR1H100SFT3G = 10,000 per 13 in reel/8 mm tape
Device Marking: L1H
Polarity Designator: Cathode Band
Weight: 11.7 mg (approximately)
Case: Epoxy, Molded
Lead Finish: 100% Matte Sn (Tin)
Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Device Meets MSL 1 Requirements
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERES
100 VOLTS
SOD−123FL
CASE 498
MARKING DIAGRAM
L1HMG
G
L1H = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping
MBR1H100SFT3G SOD−123 10000/Tape & Reel
(Pb−Free)
NRVB1H100SFT3G SOD−123 10000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
August, 2014 − Rev. 2
1
Publication Order Number:
MBR1H100SF/D


  ON Semiconductor Electronic Components Datasheet  

NRVB1H100SFT3G Datasheet

Surface Mount Schottky Power Rectifier

No Preview Available !

NRVB1H100SFT3G pdf
MBR1H100SFT3G, NRVB1H100SFT3G
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
100 V
Average Rectified Forward Current
(TL = 162°C)
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
IO
IFSM
1.0 A
50 A
Storage and Operating Junction Temperature Range (Note 1)
Tstg, TJ
−65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
Thermal Resistance, Junction−to−Lead (Note 2)
Thermal Resistance, Junction−to−Ambient (Note 2)
Thermal Resistance, Junction−to−Ambient (Note 3)
ELECTRICAL CHARACTERISTICS
YJCL
RqJA
RqJA
23 °C/W
85 °C/W
330 °C/W
Characteristic
Symbol
Value
Unit
Maximum Instantaneous Forward Voltage (Note 4)
(IF = 1.0 A, TJ = 25°C)
(IF = 2.0 A, TJ = 25°C)
(IF = 1.0 A, TJ = 125°C)
(IF = 2.0 A, TJ = 125°C)
VF V
0.76
0.84
0.61
0.68
Maximum Instantaneous Reverse Current (Note 4)
(Rated dc Voltage, TJ = 25°C)
(Rated dc Voltage, TJ = 125°C)
IR
40 mA
0.5 mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Mounted with 700 mm2 copper pad size (Approximately 1 in2) 1 oz FR4 Board.
3. Mounted with pad size approximately 20 mm2 copper, 1 oz FR4 Board.
4. Pulse Test: Pulse Width 380 ms, Duty Cycle 2.0%.
http://onsemi.com
2


Part Number NRVB1H100SFT3G
Description Surface Mount Schottky Power Rectifier
Maker ON Semiconductor
Total Page 5 Pages
PDF Download
NRVB1H100SFT3G pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 NRVB1H100SFT3G Surface Mount Schottky Power Rectifier ON Semiconductor
ON Semiconductor
NRVB1H100SFT3G pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components