T-51515-D104J-FW-A-AA is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data 640 ´ 480, 260K-color images are displayed on the 10.4” diagonal
screen. Input power voltage is single 5.0V for LCD driving. Both 3.3V-CMOS and 5.0V-CMOS
level voltage are acceptable for logic input voltage.
Inverter for backlight is not included in this module. General specifications are summarized in
the following table:
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Number of Color
Wide Viewing Angle Technology
Optimum Viewing Angle(Contrast ratio)
211.2 (H) ´ 158.4 (V)
640 ´ 3 (H) ´ 480 (V)
0.33 (H) ´ 0.33 (V)
RGB vertical stripe
Optical compensation film
Module Size (mm)
Module Mass (g)
243.0 (W) ´ 181.6 (H) ´ 12.2 (D)
CCFL, 2-tubes, replaceable
Anti-glare and hard-coating 3H
Characteristic value without any note is typical value.
The LCD product described in this specification is designed and manufactured for the standard
use in OA equipment and consumer products, such as computers, communication equipment,
industrial robots, AV equipment and so on.
Do not use the LCD product for the equipment that require the extreme high level of reliability,
such as aerospace applications, submarine cables, nuclear power control systems and medical
or other equipment for life support.
ADI assumes no responsibility for any damage resulting from the use of the LCD product in
disregard of the conditions and handling precautions in this specification.
If customers intend to use the LCD product for the above items or other no standard items,
please contact our sales persons in advance.