http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Omron
Omron

F03-16PS Datasheet Preview

F03-16PS Datasheet

Liquid Leakage Point Sensor

No Preview Available !

F03-16PS pdf
Liquid Leakage Point Sensor
F03-16PS
CSM_F03-16PS_DS_E_2_2
A New Liquid Leakage Point Sensor Has Been Added
to the K7L Series. Fluoroplastic Coating on the
Bottom Electrode Ensures Chemical Resistance.
• Can be used in conjunction with Sensing Bands.
• Stud screw mounting requires no tools for installation.
• No tools means the Sensor can be wiped clean quickly and easily.
• The optional Mounting Bracket enables faster installation than three-screw
mounting.
• Connect multiple Sensors to one K7L Amplifier for significant cost savings.
Ordering Information
Indicates models that allow free cutting.
Sensors
Product name
Main material
Cable material
Electrode material
Liquid Leakage Point Sensor
Polyethylene
Outer sheath: PVC
Inner sheath: Fluoroplastic
SUS304
SUS304 and fluoroplastic coating
Mounting Brackets (See note 1.)
---
---
Terminal Block (See note 2.)
Nylon 6.6
---
---
Note: 1. Use a commercially available bonding agent for PVC. One bag contains 10 Brackets.
2. One bag contains 10 Blocks.
Amplifier
Product name
Liquid Leakage Sensor Amplifier
K7L-U
Model
Model
F03-16PS
F03-16PS-F
F03-26PS
F03-20
Specifications
Wiring Diagram
Material Sensor Am-
plifier
Conductor
Core
Ambient operating
temperature range
Weight
Maximum number of
Point Sensors con-
nected per Amplifier
Applicable Amplifier
Polyethylene
Outer sheath: PVC, Inner sheath: Fluorine resin
F03-16PS: SUS304 stainless steel
F03-16PS-F: SUS304 and fluorine coating
10 to 60°C
Approx. 30 g
Any number up to an overall cable length of
400 m.
K7L-U (excluding Liquid Leakage Sensor
Amplifier with disconnection detection function)
Mounting Methods
Any number of Sensors can be connected in parallel up to an overall
cable length of 400 m. Leakage areas cannot be specified with the
K7L.
54
63
72
81
K7L-U
Liquid Leakage
Sensor Amplifier
44
33
22
44
33
22
F03-16PS
Liquid Leakage Point Sensor
44
33
22
F03-20
Terminal Block
F03-16PS
Liquid Leakage Point Sensor
Sensing Band
Overall cable length: 400 m max.
Stud Screw Mounting
Securing the Sensor with a Nut
Securing the Sensor with a Wing Nut
Special Bracket Mounting
(See note.)
Note: Use a commercially available bonding agent for PVC.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
1



Omron
Omron

F03-16PS Datasheet Preview

F03-16PS Datasheet

Liquid Leakage Point Sensor

No Preview Available !

F03-16PS pdf
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
2009.1
In the interest of product improvement, specifications are subject to change without notice.
(c)Copyright OMRON Corporation 2009 All Right Reserved.


Part Number F03-16PS
Description Liquid Leakage Point Sensor
Maker Omron
Total Page 2 Pages
PDF Download
F03-16PS pdf
Download PDF File


Buy Electronic Components




Related Datasheet

1 F03-16PS Liquid Leakage Point Sensor Omron
Omron
F03-16PS pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components