1A, Hysteretic, High Brightness LED Driver with Internal
The RT8472 is a high efficiency, continuous mode inductive
step-down converter, designed for driving single or multiple
series connected LEDs from a voltage source higher than
the LED voltage. It operates from an input voltage of 5V to
30V and employs hysteretic control with a high side current
sense resistor to set the constant output current.
The RT8472 includes an output switch and a high side
output current sensing circuit, which uses an external
resistor to set the nominal average output current. LED
brightness control is achieved with PWM dimming from
an analog or PWM input signal.
The RT8472 is available in a small TSOT-23-5 package.
J5 : TSOT-23-5
Lead Plating System
G : Green (Halogen Free and Pb Free)
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
z 5V to 30V Input Voltage Range
z Hysteretic Control with High Side Current Sensing
z Internal N-MOSFET with 350mΩ Low RDS(ON)
z 1A Output Current
z Up to 97% Efficiency
z Typical ±5% LED Current Accuracy
z Analog or PWM Control Signal for LED Dimming
z 300Hz On-Board Ramp Generator
z Input Under Voltage Lockout
z Thermal Shutdown Protection
z RoHS Compliant and Halogen Free
z Automotive LED Lighting
z High Power LED Lighting
z Indicator and Emergency Lighting
z Architectural Lighting
z Low Voltage Industrial Lighting
z Signage and Decorative LED Lighting
07= : Product Code
DNN : Date Code
LX GND ADJ
Copyright ©2013 Richtek Technology Corporation. All rights reserved.
DS8472-01 March 2013
is a registered trademark of Richtek Technology Corporation.