http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Sanken
Sanken

SEL6414 Datasheet Preview

SEL6414 Datasheet

Round-type contact mount LEDs (for automatic insertion)

No Preview Available !

SEL6414 pdf
Round-type contact mount LEDs (for automatic insertion)
sSEL6010 series (Standard type)
SEL6210R Outline drawing A
sSEL6014 series (Wide viewing angle)
SEL6414E Outline drawing B
3.5 1.0min
Cathode
23.0min
5.5±0.5
(1.7)
3.5±0.1
3.5 1.0min
Cathode
23.0min 4.5±0.5
(1.6)
2.5±0.1
0.4±0.1
Resin heap
0.8max
0.4±0.1
Resin heap
0.8max
sSEL6015 series (Narrow viewing angle)
Absolute maximum ratings (Ta=25°C)
Symbol
Unit
Ratings
IF mA
30
IFP mA
100
VR V
3
Top °C
–30 to +85
Tstg °C
–30 to +100
qSEL6000 series LEDs pack-
aged on tapes can withstand
shocks caused by insertion ma-
chines; Thus, they can be con-
tact-mounted automatically on
circuit boards.
Recommended dimensions of
insertion holes on printed cir-
cuit boards
ø0.91.0
2.54mm
SEL6915A Outline drawing C
3.5 1.0min
Cathode
23.0min
Resin burr(1.7)
0.3max
3.5±0.1
0.4±0.1
Cathode mark
Resin heap
0.8max
sExternal dimensions: Unit: mm Tolerance: ±0.3
Viewing angle
SEL6010 series
0°
30° 30°
SEL6014 series
0°
30° 30°
SEL6015 series
0°
30° 30°
60° 60° 60° 60° 60° 60°
90° 90°
100%
50
0
50 100%
Viewing angle of a non-diffused lens
90° 90°
100%
50
0
50 100%
Viewing angle of a non-diffused lens
90° 90°
100%
50
0
50 100%
Viewing angle of a non-diffused lens
0°
30° 30°
60° 60°
90° 90°
100%
50
0
50 100%
Viewing angle of a diffused lens
18



Sanken
Sanken

SEL6414 Datasheet Preview

SEL6414 Datasheet

Round-type contact mount LEDs (for automatic insertion)

No Preview Available !

SEL6414 pdf
Type No.
SEL6210R
SEL6210S
SEL6410G
SEL6410E
SEL6510G
SEL6510C
SEL6710Y
SEL6710K
SEL6810D
SEL6810A
SEL6910D
SEL6910A
SEL6214S
SEL6414E
SEL6514C
SEL6814A
SEL6914A
SEL6215S
SEL6415E
SEL6515C
SEL6815A
SEL6915A
Display
form
(ø: mm)
q3.1
q3.1
q3.1
q3.1
q3.1
q3.1
q3.1
q3.1
q3.1
q3.1
q3.1
q3.1
q3.5
q3.5
q3.5
q3.5
q3.5
q3.1
q3.1
q3.1
q3.1
q3.1
Type of lens
Red tinted, diffused
Red tinted, non-diffused
Green tinted, diffused
Green tinted, non-diffused
Green tinted, diffused
Un-tinted, non-diffused
Yellow tinted, diffused
Yellow tinted, non-diffused
Orange tinted, diffused
Orange tinted, non-diffused
Orange tinted, diffused
Orange tinted, non-diffused
Red tinted, non-diffused
Green tinted, non-diffused
Un-tinted, non-diffused
Orange tinted, non-diffused
Orange tinted, non-diffused
Red tinted, non-diffused
Green tinted, non-diffused
Un-tinted, non-diffused
Orange tinted, non-diffused
Orange tinted, non-diffused
Emitting
color
High intensity red
Green
Pure green
Yellow
Amber
Orange
High intensity red
Green
Pure green
Amber
Orange
High intensity red
Green
Pure green
Amber
Orange
Electro-optical characteristics (Ta=25°C)
VF IR IV
(V) Condition (µA) Condition (mcd) Condition
IF VR IF
typ max (mA) max (V) typ (mA)
λp ∆λ
(nm) typ
12
1.9 630 35
25
2.0
2.5 10 50 3
15
20 560
45
20
5
555
16
5
570 40
15
4
10 610 35
10
1.9
6.5
587 33
14
1.9 10 630 35
2.0
2.5 10 50 3
12 20 560
20
6 555
5 610 35
1.9 10
5 587 33
1.9 30 630 35
2.0
2.5 10 50 3
50 560
20
18 20 555
30 610 35
1.9
40 587 33
Outline
drawing
A
B
C
sUsing contact mount LEDs packaged on tapes
1. Printed circuit board
2. Insertion conditions
3. Soldering conditions
qOne-side printed circuit board is recommended.
qIf there are several SMD parts on the same printed circuit board, insert the LEDs after the adhesive for
other SMD parts hardened.
qUse low insertion pusher pressure, as much as possible.
qCut and clinch: Panasert T pattern is recommended.
For N pattern, make the clinching angle of the LED’s anode as small as possible.
qPreheating must be less than 90°C (temperature on printed circuit board’s bottom surface) for no more
than two minutes
qSolder dipping must be made at a temperature of 250°C for no more than 3 seconds.
19


Part Number SEL6414
Description Round-type contact mount LEDs (for automatic insertion)
Maker Sanken
Total Page 2 Pages
PDF Download
SEL6414 pdf
Download PDF File
SEL6414 pdf
View for Mobile



Buy Electronic Components




Related Datasheet

1 SEL6410E Round-type contact mount LEDs (for automatic insertion) Sanken
Sanken
SEL6410E pdf
2 SEL6410G Round-type contact mount LEDs (for automatic insertion) Sanken
Sanken
SEL6410G pdf
3 SEL6414 Round-type contact mount LEDs (for automatic insertion) Sanken
Sanken
SEL6414 pdf
4 SEL6414E Round-type contact mount LEDs (for automatic insertion) Sanken
Sanken
SEL6414E pdf
5 SEL6415E Round-type contact mount LEDs (for automatic insertion) Sanken
Sanken
SEL6415E pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components