Baseline Configuration Specs Represented.
Modifications Encouraged - See Below
± 0.20% FS.
± 0.20% FS.
Repeatability: ± 0.10% FS.
± 0.020% FS/°F typical over the
compensated temperature range.
Input / Output Resolution
350 ± 3.5 ohms at 70°F.
Greater than 10K megohms at 50 Vdc
0.00 mV ± 1% FS at 70°F.
1.0 kHz at 15 PSI to 347 kHz at
Less than ± 0.15% FS/G at 15 PSI to
± 0.0015% FS/G at 30,000 PSI.
0 - 15, 25, 30, 50, 75, 100, 200, 500,
750,1000, 1500, 2000, 3000, 5000,
7500, 10000, 15000, 20000, 25000
and 30000 PSIA / PSIG.
15 - 200 PSI ranges: 500 PSI.
500 PSI range and up: 1.5 times range.
3 times range or 1500 PSI whichever is
Fluids and gases compatible with 316
and 347 or 17-4PH stainless steel.
7/16-20 per MS33656-4 for ranges up
to and including 10,000 PSI.
AE F250-C, 9/16-18 UNF for ranges
15,000 PSI and up.
3.5 ounces maximum.
10 Vdc recommended, 15 Vdc max.
Full Scale Output
3.00 ± 0.015 mV per volt of excitation
Stainless steel hermetic to mate with
an MS3116-10-6S or equal.
Excitation +A, -D; Signal +B, -C;
No connection E, F. (Shunt avail.)
Compensated Temperature Range
-65°F to +250°F.
(-320°F to +425°F optional)
Operating Temperature Range
-100°F to +300°F.
(-320 to +450°F optional)
Body and pressure cavity of stainless
steel, hermetically sealed.
Stellar Technology Incorporated is an
We realize transducer applications vary greatly and as
such our designs are flexible. Choice of pressure port,
electrical termination, material compatibility and
performance characteristics are a few of the many
options available. Specifications on this datasheet
represent the standard configuration only. Product and
company names listed are trademarks of their respective
companies. Specifications subject to change without
notice. See accessory listing for additional choices.
Stellar Technology warrants that its product shall be free from defective
workmanship and/or material for a twelve month period from the date of
shipment, provided that Stellar Technology’s obligation hereunder shall be
limited to correcting any defective material FOB our factory. No allowance
will be made for any expenses incurred for correcting any defective
workmanship and/or material without written consent by Stellar Technology.
This warranty is in lieu of all other warranties expressed or implied.
Contact the factory or your Authorized
Click For More
Stellar Technology, Inc. Representative.
Due to the nature of technology, changes are inevitable. For latest technical specifications, see our website.
237 Commerce Drive • Amherst, NY 14228 • USA
Copyright © 2004 Stellar Technology Incorporated • All Rights Reserved
Tel: 716.250.1900 • Fax: 716.250.1909
Datasheet P/N: -See New ST120