Absolute Maximum Ratings (Ta=25°C)
SYMBOL RATING UNIT
Forward current derating (Ta≥75°C)
Peak Transient Forward Current (Note 1,2)
Output Current 1 (Ta ≤ 25℃) (Note 1)
IO1 25/-15 mA
Output Current 2 (Ta = 100℃) (Note 1)
IO2 5/-5 mA
VO -0.5 to 20
VCC -0.5 to 20
Operating Temperature Range
Topr -40 to 100
Storage Temperature Range
Tstg -55 to 125
Lead Soldering Temperature (10 s)
(AC,1 min, R.H.≤ 60%,Ta=25°C)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Each Channel.
Note 2: Pulse width ≤ 1μs, 300 pps.
Note 3: This device is regarded as a two terminal device: pins 1, 2, 3 and 4 are shorted together,
as are pins 5, 6, 7 and 8.
Recommended Operating Conditions
Input Current , ON
Input Voltage , OFF
SYMBOL MIN TYP. MAX UNIT
IF(ON) 2 ― 10 mA
― 0.8 V
VCC 4.5 ― 20 V
-40 ― 100 °C
* This item denotes operating range, not meaning of recommended operating conditions.
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Free Datasheet http://www.datasheetlist.com/