CMOS 8–Bit Microcontrollers
1. Outline and Characteristics
The TMP90PM38 is a system evaluation LSI having a
built-in One-Time PROM (16K byte) for TMP90CM38.
A programming and veriﬁcation for the internal PROM is
acheived by using a general EPROM programmer with an adapter
The function of this device is exactly the same as the
TMP90CM36 by programming to internal PROM:
OTP 32968 x 8bit
1024 x 8bit
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (ofﬁce equipment, communication equipment, measuring equipment, domestic electriﬁcation, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, trafﬁc signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.