http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Vishay Intertechnology Electronic Components Datasheet

TIP3526 Datasheet

(TIP3xxx) Infrared Touch Panels

No Preview Available !

TIP3526 pdf
TIP
Vishay Dale
Infrared Touch Panels
With Controller
FEATURES
Fast response time
Flexible operating modes
User transparent
Rugged construction
Sealed for environmental resistance
Immune to high or changing ambient light
RS-232C interface
Pre-assembled - no assembly or disassembly required to
mount display
TIP products are infrared touch panels designed to fit most flat
panel display technologies. The touch panels are a matrix of
infrared diodes and detectors, scanning electronics,
micro-processor controller, bezel/optical filter assembly and
hardware to mount the touch panel and controller to the flat
panel display. These touch panels are ideal for many
applications including medical instrumentation, machine or
process controls, point of sale devices, public information
displays, banking and military.
Vishay Dale® TIP touch panels have a unique patented scan-
ning l9ogic system that makes them virtually immune to most
lighting environments.
www.DataSheet4U.com
Optional PC based software (TBDriver, a DOS mouse
emulator; and TWDriver, a Windows® mouse emulator)
provide simple touch panel integration.
Windows® is a registered trademark of the Microsoft
Corporation.
ELECTRICAL SPECIFICATIONS
Voltage: + 12 VDC ± 5%.
Current: 400 mA typical.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0°C to + 55°C.
Storage Temperature: - 55°C to + 85°C.
Relative Humidity: 10 - 90% non-condensing.
INTERFACE SPECIFICATIONS
Type: RS-232C.
Data Rate: 300, 1200, 9600 baud and auto baud.
Word Format: 8 bits, no parity, 1 start bit, 1 stop bit.
ORDERING INFORMATION
TIP
MODEL
3216
MATRIX
FA
DISPLAY
DESIGNATOR
A
FILTER *
XXX
DASH NUMBER
(If Required)
TOUCH PANEL
DISPLAY
MATRIX TOUCH POINTS PIXELS TECHNOLOGY MANUFACTURER PART NUMBER DESIGNATOR
3216
63 x 31
512 x 256
ELD
Finlux
Planar
MD512.256
EL6648MSS
FA
PA
3220
63 x 39
640 x 400
ELD
Finlux
Planar
Sharp
MD640.400
EL8358HR
LJ640U27
FB
PB
SA
3224
63 x 47
640 x 480
ELD
Sharp
LJ64ZU49
SB
3526
69 x 51
640 x 480
ELD
Planar
EL7768MS
PC
A = Non polarized, gray
B = Polarized, gray
C = Non polarized, amber
D = Polarized, amber
S = Special - Contact
factory
*Other user specified filters will be designated as "S". Contact factory for availability. Any "S" filter designation will require a factory assigned
dash number suffix. Filters A-D are plastic. Glass filters may be available on selected models.
Note: Many additional touch panel options available to fit color LCD's and other display technologies. Please contact factory for assistance.
www.vishay.com
2
Document Number: 37025
Revision 05-Dec-00


Vishay Intertechnology Electronic Components Datasheet

TIP3526 Datasheet

(TIP3xxx) Infrared Touch Panels

No Preview Available !

TIP3526 pdf
TIP
Vishay Dale
GENERAL DESCRIPTION
Each Vishay Dale® touch panel has infrared LED emitters and
detectors along the Xand Yaxis, forming a grid of
infrared light beams across the face of the display. The first
two numbers of the TIP "matrix" number specify the number of
vertical beams and the last two numbers specify the number
of horizontal beams. The controller scans the emitter/detector
pairs one at a time and determines whether both X and Y beams
are blocked, indicating that a finger or stylus is present. (When
beams are blocked on only one axis, they are ignored and not
reported to the host.) The controller determines the
coordinates of the touch point and reports them to the host
computer. By interpolating a "virtual" beam between two
physical beams, the number of touch points on each axis is
effectively doubled. When an odd number of beams along
either axis is blocked, the coordinate of the center physical
beam is reported. When an even number of beams is blocked,
the coordinate of the virtual beam in the center of the blocked
beams is calculated and reported. The touch controller
supports ENTER, EXIT, CONTINUOUS and TRACKING
report modes or combinations of these modes. The controller
also has a beeper output. Hardware handshaking, software
handshaking, baud rates and auto-baud features are jumper
selected. The user initializes the desired report modes and
requests reports when needed.
Several optical filters are standard to provide the most cost
effective filter for each application. "Non-standard" filters may
be specified as well. The filter increases the contrast ratio of
the display and protects the display face and electronics.
Vishay Dale® can assist in recommending the optimum filter
www.DataSheet4U.com based on years of experience as a display manufacturer. The
perimeter of the filter is bonded to the bezel and a bezel to
front panel gasket is includedto provide a splash proof seal.
MATING CONNECTORS
DALE
OTHER
J1
J5, J6
J4
280105-02
280108-07
280108-06
AMP 746288-1
MOLEX 22-01-3027 housing, 08-50-0114 terminals
MOLEX 22-01-3037 housing , 08-50-0114 terminals
PIN DESCRIPTION
J1 DATA CONNECTOR
PIN SIGNAL
PIN SIGNAL
1
RD (to touch panel) 2
Ground
3 + 12 (optional)
4 + 12 (optional)
5 CTS
6 Reserved
7 RTS
8 Reserved
9 Ground
10 TD (from touch panel)
J5, J6 POWER CONNECTOR
PIN SIGNAL
1 + 12 VDC
2 GND
J4 AUDIO FEED BACK CONNECTOR
PIN SIGNAL
1 GND
2 Beeper Signal (active low)
3 + 5 VDC
COMMAND SET (A bridged)
11H
13H
20H
21H
22H
23H
24H
25H
26H
27H
28H
29H
2AH
2BH
2CH
2EH
2FxxH
34H
DC1, Ctl Q, XON Software handshaking
DC3, Ctl S, XOFF, Software handshaking
Enable EXIT point mode
Disable EXIT point mode (default)
Enable ENTER point mode
Disable ENTER point mode (default)
Enable CONTINUOUS mode/disable TRACKING
Disable CONTINUOUS mode (default) and TRACKING
Enable touch panel
Disable touch panel (default)
Request Failed beam report
Enable automatic report transfer
Disable automatic report transfer (default)
Request one coordinate report
Reset touch panel
Disable beeper (default)
Sound beep, xx = duration (00H to FFH)
Enable TRACKING mode/disable CONTINUOUS
DIMENSIONS in inches [millimeters]
Touch Frame
VIEWING AREA
C
D
MODEL
3216
3220
3224
3526
B
9.608
[244.04]
9.748
[247.60]
9.680
[246.0]
10.404
[264.26]
Document Number: 37025
Revision 05-Dec-00
A
B
C
4.86
[123.44]
6.238
[158.45]
6.687
[169.85]
7.311
[185.70]
D
5.67
[144.02]
6.950
[176.53]
7.086
[179.98]
7.532
[191.31]
VIEWING
AREA
7.9 x 4.1
[200.66 x 104.14]
8.0 x 5.2
[203.20 x 132.08]
7.8 x 5.9
[198.12 x 149.86]
8.6 x 6.4
[218.44 x 162.56]
www.vishay.com
3


Part Number TIP3526
Description (TIP3xxx) Infrared Touch Panels
Maker Vishay Intertechnology
Total Page 4 Pages
PDF Download
TIP3526 pdf
Download PDF File
TIP3526 pdf
View for Mobile






Related Datasheet

1 TIP3526 (TIP3xxx) Infrared Touch Panels Vishay Intertechnology
Vishay Intertechnology
TIP3526 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components