Download the TPF110L datasheet PDF.
This datasheet also covers the TPF110 variant, as both devices belong to the same ultra-low power video filter family and are provided as variant models within a single manufacturer datasheet.
General Description
The TP110/TP110L is a single rail-to-rail 6th-order output reconstruction filter with a -3dB roll-off frequency of 9MHz and a slew rate of 38V/μs, with input signal DC restoration accomplished with an internal sync tip clamp.
Key Features
6th-order Butterworth Low-Pass Filter.
Integrated Input Clamp And Level Shift Circuit.
SAG correction reduces AC coupling capacitor size.
High Slew Rate：38V/µ s.
Very Low Quiescent Current：TPF110 3.9mA（Typ. ），
TPF110L 1.9mA（Typ. ）.
Super Low Stand-By Mode：0.5µ A（Typ. ）.
AC- or DC-Coupled Output Driving Dual Video Loads
(75Ω).
Excellent Video Performance: Differential Gain 0.4%，
Differential Phase 0.7°.
High Input And Output Isolation(Disable):96 dB @1MH.
Full PDF Text Transcription for TPF110L (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
TPF110L. For precise diagrams, and layout, please refer to the original PDF.
TPF110/TPF110U/TPF110L Ultra-low Power Video Filter with Shut-down & SAG Correction Features ⚫ 6th-order Butterworth Low-Pass Filter ⚫ Integrated Input Clamp And Level Sh...
View more extracted text
rder Butterworth Low-Pass Filter ⚫ Integrated Input Clamp And Level Shift Circuit ⚫ SAG correction reduces AC coupling capacitor size ⚫ High Slew Rate：38V/µ s ⚫ Very Low Quiescent Current：TPF110 3.9mA（Typ.）， TPF110L 1.9mA（Typ.） ⚫ Super Low Stand-By Mode：0.5µ A（Typ.） ⚫ AC- or DC-Coupled Output Driving Dual Video Loads (75Ω) ⚫ Excellent Video Performance: Differential Gain 0.4%， Differential Phase 0.7° ⚫ High Input And Output Isolation(Disable):96 dB @1MHz ⚫ 6dB Gain(2V/V), Rail To Rail Output ⚫ Wide Power Supply：+2.85V To +5.
TPF110L Datasheet
