AAT1230
Key Features
- SwitchReg™ The output voltage can be dynamically set by activating one of two reference levels (FB1 or FB2) through the SEL logic pin. Optionally, AnalogicTech’s
- Simple Serial Control™ (S2Cwire™) single wire interface provides dynamic programmability across a wide output voltage range through the EN/ pin. The AAT1230 is available in a Pb-free, thermallyenhanced 16-pin 3x4mm TDFN low-profile package or a Pb-free 12-pin TSOPJW package. * * * * * * * * * * * * * * *
- VIN Range: 2.7V to 5.5V Maximum Output: 18V @ 100mA True Load Disconnect Dynamic Voltage Control Options Hysteretic Control - No External Compensation Components - Excellent Load Transient Response - High Efficiency at Light Load Up to 2MHz Switching Frequency Ultra-Small Inductor and Capacitors Integrated Low RDS(ON) MOSFET Switches Up to 85% Efficiency <1µA Shutdown Current Integrated Soft Start Cycle-by-Cycle Current Limit Short-Circuit, Over-Temperature Protection Available in TSOPJW-12 or TDFN34-16 Package -40°C to +85°C Temperature Range
