S-576Z1L1B-L3T2U Datasheet | ABLIC

S-576Z B Series .ablic. © ABLIC Inc., 2019-2020 125°C OPERATION, HIGH-WITHSTAND VOLTAGE, HIGH-SPEED, ZERO CROSSING LATCH HALL EFFECT IC Rev.1.1_00 This IC, developed by CMOS technology, is a high-accuracy Hall effect IC that operates with high temperature and high-withstand voltage. The IC switches output voltage level when the IC detects magnetic flux density (magnetic field) polarity changes. The Zero Crossing Latch detection method realizes polarity changes detection with the higher accuracy than the conventional bipolar latch method. Using this IC with a magnet makes it possible to detect the rotation status in various devices. ABLIC Inc. offers a "magnetic simulation service" that provides the ideal bination of magnets and our Hall effect ICs for customer systems. Our magnetic simulation service will reduce prototype production, development period and development costs. In addition, it will contribute to optimization of parts to realize high cost performance. For more information regarding our magnetic simulation service, contact our sales representatives. - Features - Uses a thin (t0.80 mm max.) TSOT-23-3S or ultra-thin (t0.50 mm max.) HSNT-6(2025) package, allowing for device miniaturization - Contributes to reduction of mechanism operation dispersion through high accuracy detection of magnetic flux density (magnetic field) polarity changes - Contributes to device safe design with a built-in output current limit circuit - Specifications - Applications - Pole detection: Zero Crossing Latch detection - Output logic- 1: VOUT = "L" at S pole detection VOUT = "H" at S pole detection - Output form- 1: Nch open-drain output Nch driver + built-in pull-up resistor (1.2 kΩ typ.) - Zero crossing latch point: BZ = 0.0 m T typ. - Release point (S pole)- 1: BRS = 3.0 m T typ. BRS = 6.0 m T typ. - Chopping frequency: f C = 500 k Hz typ. - Output delay time: t D = 8.0 μs typ. - Power supply voltage range- 2: VDD = 2.7 V to 26.0 V - Built-in...