UT80CRH196KD Description
Port 0 is an 8-bit input only port when used in its default mode. When configured for their alternate function, five of the bits are bi-directional EDAC check bits as shown in Table 1. Port 1 is an 8-bit, quasi-bidirectional, I/O port.
UT80CRH196KD Key Features
- Register to Register Architecture
- 1000 Byte Register RAM q Three 8-bit I/O Ports q On-board Interrupt Controller q Three Pulse-Width Modulated Outputs q H
- 16-Bit Watchdog Timer, Four 16-Bit Software Timers
- Three 16-Bit Counter/Timers q Radiation-hardened process and design; total dose irradiation testing to MIL-STD-883 Metho
- Total-dose: 100K rads(Si)
- Effective LET threshold: 25 MeV-cm 2/mg
- Saturated cross section: 3.66e-7cm 2/bit
- Latchup immune (LET > 128 MeV-cm2 /mg) q Error detection and correction for external memory accesses q QML Q and QML V p
UT80CRH196KD Applications
- P0.7): Port 0 is an 8-bit input only port when used in its default mode. When configured for their alternate function, five of the bits are bi-directional EDAC
- P1.7): Port 1 is an 8-bit, quasi-bidirectional, I/O port. All pins are quasi-bidirectional unless the alternate function is selected per Table 2. When the pins