AM30KW-C Datasheet | AIMTEC

DESCRIPTION Our AM30KW-C series is a family of cost effective 30W single and dual output DC-DC converters. These converters are shielded on all six sides and encapsulated with a nickel-coated copper with a non-conductive base and dimensions of 50.8x40.64x11.9mm. The high performance features of our AM30KW-C ponents include short circuit protection with hiccup auto recovery, tight line regulation and a high efficiency operation coefficient up to 89%. 18 models operate from an input voltage of 24, 48VDC producing output voltages of 1.8, 2.5, 3.3, 5, 12, 15 & 24VDC, ±5, ±12, ±15VDC . The normal operation is specified over the full operating temperature range of 25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Output Specifications: Voltage range 24 VDC, 10~40VDC Voltage accuracy ±2%, max. 48 VDC, 18~75VDC Ripple (1.8 & 5V) 100m Vmax Filter π (Pi) Network Ripple (Others) ±1%, max. Noise ±1%, max. Isolation Specifications: Short circuit protection Hiccup, auto-recovery Rated voltage 1500VDC Over current protection Works over 120% of rating Resistance >1000 Mohms and recovers automatically Capacitance 1000p F Over voltage protection Zener diode clamp protection Line regulation (HL-LL) ±0.5%, typ. General Specifications: Load regulation (10-100%)±1%, typ.,100m V , max -(1,8 - 5V) Efficiency 78% to 83% Temperature coefficient ±0.02%/°C, typ. Switching frequency 300KHz, typ. 100% load Physical Specifications: Environmental Specifications: Dimensions 50.8 x 40.6 x 11.9mm,±0.5mm Operating temperature -25°C …+70°C 2.0 x 1.6 x 0.47inches Storage temperature -55°C …+105°C Weight 58g Case temperature +100°C, max. Case material Nickel-Coated Copper with Humidity (non-condensing) Up to 95% Non-Conductive base, Cooling Free-air convection six sides’ shielded MTBF: > 550,000 hrs (MIL-HDBK-217F,...