900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






AIMTEC

AM40K-C Datasheet Preview

AM40K-C Datasheet

40 watt dc-dc converters

No Preview Available !

www.DataSheet4U.com
AM40K-C Series
40 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
SIX-SIDED CONTINUOUS SHIELD
HIGH EFFICIENCY
STANDARD PACKAGE
GENERAL DESCRIPTION
OurAM40K-C series is a family of cost effective 40W single out-
put DC-DC converters. These converters are shielded on all six
sides and encapsulated with a nickel-coated copper with a non-con-
ductive base and dimensions of 50.8x40.64x10.8mm. The high
performance features of our AM40K-C components include short
circuit protection with hiccup auto recovery, tight line regulation
and a high efficiency operation coefficient up to 89%.
Seven models operate from an input voltage of 48VDC
producing output voltages of 1.8, 2.5, 3.3, 5, 12, 15 &
24VDC. The normal operation is specified over the full
operating temperature range of -25°C to +71°C with no
derating required. Cooling is done by free air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Filter
48 VDC, 36~75VDC
p (Pi) Network
Isolation Specifications:
Rated voltage
Resistance
Capacitance
1500VDC
>1000 Mohms
1000pF
General Specifications:
Efficiency
Switching frequency
80% to 89%
400KHz, typ. 100% load
Environmental Specifications:
Operating temperature
-25°C …+71°C
Storage temperature
-55°C …+105°C
Case temperature
+95°C, max.
Humidity (non-condensing) Up to 95%
Cooling
Free-air convection
Output Specifications:
Voltage accuracy
±2%, max.
Ripple
<0.2% Vout +20mVmax (Vp-p)
Noise
<0.5% Vout +50mVmax (Vp-p)
Short circuit protection Hiccup, auto-recovery
Over current protection Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, typ.
Load regulation (10-100%) ±1%, typ.
Temperature coefficient ±0.02%/°C, typ.
Physical Specifications:
Dimensions
50.8x40.64x10.8mm,
2.0x1.6x0.43inches
Weight
58g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides’ shielded
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
VISIT US AT WWW.AIMTEC.CA
DataSheet4 U .com
89
Continued on next page




AIMTEC

AM40K-C Datasheet Preview

AM40K-C Datasheet

40 watt dc-dc converters

No Preview Available !

www.DataSheet4U.com
AM40K-C Series
OUTLINE DIMENSIONS & PIN CONNECTIONS
MECHANICAL DIMENSION (Top View)
DERATING
Pin
1
2
3
4
5
6
TRIMMING
Single
On/Off Control (Optional)
-V Input
+V Input
Trim
-V Output
+V Output
BLOCK DIAGRAM
MODELS
Single output
Models
AM40K-4801SC
AM40K-4802SC
AM40K-4803SC
AM40K-4805SC
AM40K-4812SC
AM40K-4815SC
AM40K-4824SC
90
DataSheet4 U .com
Input Voltage
36VDC-75VDC
Ouput Voltage
1.8VDC
2.5VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
Ouput Current max.
8000mA
8000mA
8000mA
8000mA
3300mA
2660mA
1660mA
TO ORDER CALL 1-888-9-AIMTEC


Part Number AM40K-C
Description 40 watt dc-dc converters
Maker AIMTEC
Total Page 2 Pages
PDF Download

AM40K-C Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 AM40K-4801SC 40 watt dc-dc converters
AIMTEC
2 AM40K-4802SC 40 watt dc-dc converters
AIMTEC
3 AM40K-4803SC 40 watt dc-dc converters
AIMTEC
4 AM40K-4805SC 40 watt dc-dc converters
AIMTEC
5 AM40K-4812SC 40 watt dc-dc converters
AIMTEC
6 AM40K-4815SC 40 watt dc-dc converters
AIMTEC
7 AM40K-4824SC 40 watt dc-dc converters
AIMTEC
8 AM40K-C 40 watt dc-dc converters
AIMTEC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy