A29L160C Datasheet | AMIC

Features - Single power supply operation - Regulated voltage range: 2.7 to 3.6 volt read and write operations for patibility with high performance 3.3 volt microprocessors - Access times: - 70ns (max.) - Current: - 15m A typical active read current - 30m A typical program/erase current - 3μA typical CMOS standby - 3μA Automatic Sleep Mode current - Flexible sector architecture - 16 Kbyte/ 8 Kbyte X2/ 32 Kbyte/ 64 Kbyte X31 sectors - 8 Kword/ 4 Kword X2/ 16 Kword/ 32 Kword X31 sectors - Any bination of sectors can be erased - Supports full chip erase - Sector protection: A hardware method of protecting sectors to prevent any inadvertent program or erase operations within that sector. Temporary Sector Unprotect feature allows code changes in previously locked sectors - Unlock Bypass Program mand - Reduces overall programming time when issuing multiple program mand sequence - Top or bottom boot block configurations available - Embedded Algorithms - Embedded Erase algorithm will automatically erase the entire chip or any bination of designated sectors and verify the erased sectors - Embedded Program algorithm automatically writes and verifies data at specified addresses - Minimum 100,000 program/erase cycles per sector - 20-year data retention 125°C - Reliable operation for the life of the system - CFI (mon Flash Interface) pliant - Provides device-specific information to the system, allowing host software to easily reconfigure for different Flash devices - patible with JEDEC-standards - Pinout and software patible with single-power-supply Flash memory standard - Superior inadvertent write protection - Data Polling and toggle bits - Provides a software method of detecting pletion of program or erase operations - Ready / BUSY pin (RY / BY ) - Provides a hardware method of detecting pletion of program or erase operations - Erase Suspend/Erase Resume - Suspends a sector erase operation to read data from, or program data to, a non-erasing sector, then resumes the erase...