A7103A Datasheet | AMICCOM

description Add top marking info., reflow profile, Carry tape & reel dimensions. Add hardware control mode description Modify ordering information Add look-up-table of setting of TRx frequency. Add look-up-table in HW control and SPI control mode. Add look-up-table of frequency deviation in FSK modulation. Add RX sensitivity vs different IF BW filter. Add RX sensitivity at BER < 1E-2. Add Preamble format. Modify A7103B’s IF BW = mid. in HW control mode. Rename Off mode to Shut-down mode. Remove constrain of Vdd = 3.3 V operation. Separate A7103A / A7103B datasheet. Remove CKO pin / Remove CKO function. Remove programmable IF Filter, fix IFBW = mid only. Modify RC filters in front of VDD_A and VDD_D. ASK data rate 1K ~ 10Kbps, 2,2V ~ 3,0V operation range. Issue Date 2007/7/19 2007/9/21 2007/10/5 2008/2/27 2008/3/28 2008/9/14 2008/11/4 2009/01/14 2010/Jan Remark Important Notice: AMIC reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice. AMIC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in lifesupport applications, devices or systems or other critical applications. Use of AMIC products in such applications is understood to be fully at the risk of the customer. Jan. 2010, Version 0.8 (PRELIMILARY) Amic .avant..cn AMIC munication Corporation service@avant..cn Amic .avant..tw service@avant..tw <Preliminary> 315M/434MHz ASK/FSK Transceiver Table of Content 1. General Description 3 2. Typical Applications 3 3. Features...