900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






AMI SEMICONDUCTOR

AMIS-40615 Datasheet Preview

AMIS-40615 Datasheet

LIN Transceiver

No Preview Available !

AMIS-40615
LIN Transceiver with 3.3V Voltage Regulator
Data Sheet
1.0 General Description
The AMIS-40615 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller
and the physical bus. The transceiver is implemented in AMI Semiconductor’s SmartPower, high-voltage, mixed-signal 0.35µm CMOS
technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip.
The AMIS-40615 LIN device is a member of AMI Semiconductor’s in-vehicle networking (IVN) transceiver family and integrates a LIN
v2.0 physical transceiver and a 3.3V voltage regulator. It is designed to work in harsh automotive environments and is certified to the
TS16949 qualification flow.
The LIN bus is designed to communicate low rate data from control devices such as door locks, mirrors, car seats, and sunroofs at the
lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node.
2.0 Key Features
2.1 LIN-Bus Transceiver
LIN compliant to specification revision 2.0 (backwards compatible to version 1.3) and J2602
SmartPower, high-voltage, mixed-signal 0.35µm CMOS technology
Bus voltage ± 45V
Transmission rate up to 20kBaud
SOIC 14 Green package
2.2 Protection
Thermal shutdown
Indefinite short-circuit protection on pins LIN and WAKE towards supply and ground
Load dump protection (45V)
Bus pins protected against transients in an automotive environment
ESD protection level for LIN, INH, WAKE, and Vbb up to ±8kV
ww2w.3.DEaMtaISCheoemt4pUa.ctoibmility
Integrated slope control
2.4 Voltage Regulator
Output voltage 3.3V / ~50mA
Wake-up input
Enable inputs for stand-by and sleep mode
INH output for auxiliary purposes (switching of an external pull-up or resistive divider towards battery, control of an external voltage
regulator etc.)
2.5 Modes
Normal mode: LIN communication with either low (up to 10kBaud) or normal slope
Sleep mode: VCC is switched “off” and no communication on LIN bus
Stand-by mode: VCC is switched “on” but there is no communication on LIN bus
Wake-up bringing the component from sleep mode into standby mode is possible either by LIN command or digital input signal on
WAKE pin. Wake-up from LIN bus can also be detected and flagged when the chip is already in standby mode.
AMI Semiconductor – March 2007, M-20544-001
www.amis.com
1




AMI SEMICONDUCTOR

AMIS-40615 Datasheet Preview

AMIS-40615 Datasheet

LIN Transceiver

No Preview Available !

AMIS-40615
LIN Transceiver with 3.3V Voltage Regulator
3.0 Ordering Information
Table 1: Ordering Information
Marketing Name
AMIS40615 AGA
Package
SOIC 150 14 GREEN (JEDEC MS-012)
Data Sheet
Temperature Range
-40°C…105°C
4.0 Key Technical Characteristics
Table 2: Key Technical Characteristics
Symbol
Parameter
Min.
Typ.
Max.
Unit
Vbb
Vbb
Ibb_SLP
Nominal battery operating voltage
Load dump protection (1)
Supply current in sleep mode
5 12
26 V
45 V
20 µA
Vcc_out(5)
Iout_max
Regulated Vcc output in normal mode, Vcc load 1mA-30mA
Regulated Vcc output in normal mode, Vcc load 0mA-50mA
Regulated Vcc output in standby mode, Vcc load 0mA-50mA
Maximum continuous Vcc output current (2)
Maximum Vcc output current, thermal shutdown can occur(2)
3.23
3.19
3.17
30
50
3.30
3.30
3.30
3.37 V
3.41 V
3.43 V
mA
mA
V_wake
Operating DC voltage on WAKE pin
Maximum rating voltage on WAKE pin
0 Vbb V
-45 45 V
Tj Junction thermal shutdown temperature
165 195 °C
Tamb
Operating ambient temperature
-40
+105
°C
Vesd
Electrostatic discharge voltage (LIN, INH, WAKE, VBB) System HBM (3) -8
+8 kV
Electrostatic discharge voltage (LIN, INH, WAKE, VBB) HBM (4)
-4
+4 kV
Electrostatic discharge voltage (other pins) HBM (4)
-2
+2 kV
Notes:
1. The applied transients shall be in accordance with ISO 7637 part 1, test pulse 5. The device complies with functional class C; class A can be reached
depending on the application and external components.
2. Current limitation is set above 50mA but thermal shutdown can occur for currents above 30mA.
3. Equivalent to discharging a 150pF capacitor through a 330resistor conform to IEC Standard 1000-4-2. The specified values are a target to be verified on
first prototypes. Based on the evaluation results, additional external protection components might be recommended to reach the specified system ESD levels
4. Equivalent to discharging a 100pF capacitor through a 1.5kresistor conform to MIL STD 883 method 3015.7.
5. Vcc voltage must be properly stabilized by external capacitors: capacitor of min. 80nF with ESR<10min parallel with a capacitor of min. 8µF, ESR<1.
www.DataSheet4U.com
AMI Semiconductor – March 2007, M-20544-001
www.amis.com
2


Part Number AMIS-40615
Description LIN Transceiver
Maker AMI SEMICONDUCTOR
PDF Download

AMIS-40615 Datasheet PDF






Similar Datasheet

1 AMIS-40615 LIN Transceiver
AMI SEMICONDUCTOR
2 AMIS-40616 LIN Transceiver
AMI SEMICONDUCTOR





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy