AMIS-710251-A6
Overview
The AMIS-710251-A6 (PI251MC-A6) is a contact imaging sensor (CIS) module. It is a successor module to its predecessor, AMIS710222-A6 (PI222MC-A6).
- 0 Key Features * * * * * * * *
- Low power-single power supply at 5.0V Light source, lens and sensor are integrated into a single module 8dpm resolution, 104mm scanning length High speed page scan - up to 167µsec/line @ 5MHz pixel rate Wide dynamic range Analog output Yellow-Green LED light source Compact size ≅ 14mm x 19mm x 120mm Light weight
- 0 Functional Description The AMIS-710251-A6 consists of 13 imaging array sensors that are cascaded to provide 832 photo-detectors. Each sensor contains its associated multiplex switches, and a digital shift register that controls its sequential readout. Each sensor also contains a chip-select switch so that each following chip is accessed sequentially as its predecessor chip completes its scan. These chips are mounted on a printed circuit board (PCB) along with clock buffers and video signal amplifier. The only change from its predecessor module is in this amplifier. It has been slightly altered to gain the single supply feature through the application of the new rail-to-rail single volt operational amplifiers
