900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






AMI SEMICONDUCTOR

AMIS-710411-A7 Datasheet Preview

AMIS-710411-A7 Datasheet

CIS Module

No Preview Available !

AMIS-710411-A7: 400dpi CIS Module
Data Sheet
1.0 General Description
The AMIS-710411-A7 (PI411MC-A7) is a contact imaging sensor (CIS) module that can operate from a single 5.0V supply. It is a linear
scanning array composed of 11 AMIS-720422 (PI3022) imaging sensor chips. The AMIS-720422 is a 400 dots per inch (dpi) solid-state
line imaging sensor chip with 128 photo sensitive elements, which are also a product of AMIS. Eleven of these devices are sequentially
cascaded to form the linear scanning array with a total of 1408 photo sensing elements. This imaging device is fabricated using MOS
imaging sensor technology for its high-speed performance and high sensitivity. It is designed for scanning A7 size (89mm) documents
with 400dpi resolution. Applications include ticket, check and card scanners, a variety of mark readers, and other automation
equipment.
2.0 Key Features
Low power-single power supply at 5.0V
Light source, lens and sensor are integrated into a single module
15.7dpm resolution, 89mm scanning length
High speed page scan - up to 282µsec/line @ 5MHz pixel rate
Wide dynamic range
Analog output
660 LED light source
Compact size 13mm x 25.6mm x 102mm
Light weight
3.0 Functional Description
The AMIS-710411-A7 consists of 11 imaging array sensors, which are cascaded to provide 1408 photo-detectors. Each sensor has its
associated multiplex switches and a digital shift register, which controls its sequential readout. Each sensor also contains a chip select
switch so that each following chip is accessed sequentially as its predecessor chip completes its scan. Theses chips are mounted on a
wwpwri.nDteatdaScihreceuti4t Ub.ocaormd (PCB) along with clock buffers and a video signal amplifier (see Figure 1).
The PCB containing the imaging array is enclosed in a module housing along with a one-to-one graded indexed micro lens array, which
focuses the image of the scanned documents onto the sensing line of the sensor chips. The document is illuminated with an LED light
source, which is also mounted in the housing (see Figure 2).
The pictorial cross section (Figure 2) shows the LED bar light source and its Illumination path. The light on the document reflects
images on the document. The reflected images focus through the micro lens onto the image sensing line of the chips where the images
are converted to proportional electrical charges. An on board amplifier processes these signal charges into proportional video signal
voltages, which are sent out to the output video port.
All components are housed in a small plastic housing and covered with a glass window. This cover glass not only serves to protect all
of the critical components within the housing from dust, but along with the micro lens, it determines the depth-of-focus because it lies in
the optical path.
AMI Semiconductor – July 06, M-20593-001
www.amis.com
1




AMI SEMICONDUCTOR

AMIS-710411-A7 Datasheet Preview

AMIS-710411-A7 Datasheet

CIS Module

No Preview Available !

AMIS-710411-A7: 400dpi CIS Module
Data Sheet
Figure 1: AMIS-710411-A7 Module Block Diagram
www.DataSheet4U.com
Figure 2: AMIS-710411-A7 Cross Sectional View
AMI Semiconductor – July 06, M-20593-001
www.amis.com
2


Part Number AMIS-710411-A7
Description CIS Module
Maker AMI SEMICONDUCTOR
PDF Download

AMIS-710411-A7 Datasheet PDF






Similar Datasheet

1 AMIS-710411-A7 CIS Module
AMI SEMICONDUCTOR





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy