AM-480272H2TMQW-A0H-F
AM-480272H2TMQW-A0H-F is LCD manufactured by AMP DISPLAY.
AMP DISPLAY INC.
SPECIFICATIONS
CUSTOMER CUSTOMER PART NO. AMP PART NO APPROVED BY DATE
Approved For Specifications Approved For Specifications & Sample
AM-480272H2TMQW-A0H)
9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: 909-980-13410 FAX: 909-980-1419 .AMPDISPLAY.
AMP DISPLAY INC
APPROVED BY
CHECKED BY
ORGANIZED BY
Date: 2010/07/27
RECORD
Revision Date Page 2010/8/27 2012/4/23 4
REVISION
Contents Editor Patrick Leo
New Release Remove the Power Voltage
Date: 2010/8/27
1. Features
(1) (2) (3) (4) (5) (6) (7) Construction : a-Si TFT-LCD with driving system, White LED Backlight. LCD type : Transmissive , Normally White Number of the Colors : 16.7M colors (R,G,B 8 bit digital each) RGB Interface 40 pin. LCD Power Supply Voltage : 3.3V single power input Interface mode: TTL RGB interface. Sync mode. Reflective ratio 0.5% ~ 2%
The timing control IC both supports DE mode and Sync mode timing. The module default is Sync mode. Mode Hardware PIN32: PIN33: PIN37: Remark Setting HSYNC VSYNC NC(DE) Sync Mode R8 NC HSYNC VSYNC NC Default needed needed DE pull low internally. DE mode R8= 0 ohm HSYNC VSYNC DE Option don’t don’t needed In DE mode, only DE signal is needed needed needed. HSYNC and VSYNC pull High internally.
It is necessary to keep tvp+tvb=12 and thp+thb=43 in SYNC mode. DE mode is unnecessary.
If you need the DE mode for mass production, please contact us to apply a part number for this option. (R8= 0 ohm).
Date: 2010/8/27
2. PHYSICAL SPECIFICATIONS
Item Display size (diagonal) Resolution Display area Pixel pitch Overall dimension Color configuration View Direction (Gray Inversion) Specifications 4.3 480RGB (W) x 272(H) 98.7 (W) x57.5 (H) 0.198 (W) x 0.198 (H) 105.5(W)x114.05(H)x3.95(D) R.G.B Vertical stripe 6 o’clock unit inch dots mm mm mm
3....
