Datasheet4U Logo Datasheet4U.com

AAT3175 - High Current LED Flash Driver Charge Pump IC

Description

The AAT3175 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED flash applications.

Features

  • ChargePump™ VIN Range: 2.7V to 5.5V Up to 300mA Total Flash Current Fully Programmable Current with Single Wire.
  • 16 Logarithmic Current Levels Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage Drives 3-in-1 or 2-in-1 Flash LEDs.
  • 0.5% Current Matching No Inductors, Low Noise Operation 1MHz Constant Switching Frequency Small Applicat.

📥 Download Datasheet

Datasheet Details

Part number AAT3175
Manufacturer ANALOGICTECH
File Size 273.05 KB
Description High Current LED Flash Driver Charge Pump IC
Datasheet download datasheet AAT3175 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AAT3170 High Current LED Flash Driver Charge Pump Skyworks
AAT3171 High Efficiency Charge Pump AAT
AAT3171 High Efficiency Charge Pump Skyworks
AAT3172 High Current LED Flash Driver Charge Pump Skyworks
AAT3174 High Efficiency Charge Pump Skyworks

Other Datasheets by ANALOGICTECH

Part Number Description
AAT3170 High Current LED Flash Driver Charge Pump IC
AAT3172 High Current LED Flash Driver Charge Pump IC
AAT3174 High Current LED Flash Driver Charge Pump IC
AAT3190 Positive/Negative Charge Pump for Voltage Bias
AAT3670 Dynamic Battery Charger and Power Manager

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com AAT3175 High Efficiency 1X/1.5X/2X Charge Pump For White LED Flash Applications General Description The AAT3175 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED flash applications. The AAT3175 is capable of driving up to three flash LEDs at 300mA total current from a 2.7V to 5.5V input. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at VIN and VOUT) make this part ideally suited for small battery-powered applications. AnalogicTech's S2Cwire™ (Simple Serial Control™) serial digital input is used to enable, disable, and set current for all LEDs with 16 level settings down to 0.
Published: |