900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






ANPEC

APL3203D Datasheet Preview

APL3203D Datasheet

Li+ Charger Protector

No Preview Available !

APL3203D/E
Li+ Charger Protection IC
Features
Input Over-Voltage Protection
Programmable Input Over-Current Protection
Battery Over-Voltage Protection
Over-Temperature Protection
High Immunity of False Triggering
High Accuracy Protection Thresholds
Fault Status Indication
Enable Input
Available in TDFN2x2-8 Package
Lead Free and Green Devices Available
(RoHS Compliant)
General Description
The APL3203D/E provides complete Li+ charger protec-
tions against over-voltage, over-current, and battery over-
voltage. The IC is designed to monitor input voltage, in-
put current, and battery voltage. When any of the moni-
tored parameters are over the threshold, the IC removes
the power from the charging system by turning off an in-
ternal switch. All protections also have deglitch time
against false triggering due to voltage spikes or current
transients. The APL3203D/E also provides over-tempera-
ture protection, a FAULT output pin to indicate the fault
conditions, and the EN pin to allow the system to disable
the IC.
Applications
Smart Phones and PDAs
Digital Still Cameras
Portable Devices
Pin Configuration
IN 1
GND 2
NC 3
FAULT 4
EP
TDFN2x2-8
(Top View)
8 OUT
7 ILIM
6 BAT
5 EN
Simplified Application Circuit
5V Adapter
or USB
IN
OUT
APL3203D/E
EN FAULT
ILIM BAT
GND
Charger Input
Charger Output
and System
Li+
Battery
Simplified Application
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
1
Rev. A.4 - Jan., 2013
www.anpec.com.tw




ANPEC

APL3203D Datasheet Preview

APL3203D Datasheet

Li+ Charger Protector

No Preview Available !

APL3203D/E
Ordering and Marking Information
APL3203D/E
APL3203D/E QB:
L03D
X
Assembly Material
Handling Code
Temperature Range
Package Code
Package Code
QB : TDFN2x2-8
Operating Ambient Temperature Range
I : -40 to 85 oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
X - Date Code
Note : ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Absolute Maximum Ratings (Note 1)
Symbol
Parameter
Rating
Unit
VIN
VOUT, VBAT
VILIM, VFAULT, VEN
IOUT
TJ
TSTG
TSDR
IN Input Voltage (IN pin to GND)
OUT, BAT Pins to GND Voltage
ILIM, FAULT, EN, Pins to GND Voltage
OUT Output Current
Maximum Junction Temperature
Storage Temperature Range
Maximum Lead Soldering Temperature,10 Seconds
-0.3 to 30
V
-0.3 to 7
V
-0.3 to 7
V
2
A
150
oC
-65 to 150
oC
260
oC
Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom-
mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
Thermal Characteristics
Symbol
θJA
Parameter
Junction to Ambient Thermal Resistance in Free Air (Note 2)
TDFN2x2-8
Typical Value
80
Note 2 :θJA is measured with the component mounted on a high effective thermal conductivity test board in free air.
Unit
°C/W
Recommended Operating Conditions
Symbol
VIN
IOUT
TJ
TA
IN Input Voltage
OUT Output Current
Junction Temperature
Ambient Temperature
Parameter
Range
Unit
4.5 to 5.5
V
0 to 1.5
A
-40 to 125
°C
-40 to 85
°C
Copyright © ANPEC Electronics Corp.
2
Rev. A.4 - Jan., 2013
www.anpec.com.tw


Part Number APL3203D
Description Li+ Charger Protector
Maker ANPEC
PDF Download

APL3203D Datasheet PDF





Similar Datasheet

1 APL3203A Li+ Charger Protector
ANPEC
2 APL3203B Li+ Charger Protector
ANPEC
3 APL3203C Li+ Charger Protector
ANPEC
4 APL3203D Li+ Charger Protector
ANPEC
5 APL3203E Li+ Charger Protector
ANPEC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy