Datasheet4U Logo Datasheet4U.com

AT83C26 - Multiple Smart Card Reader Interface

Description

The AT83C26 is a smart card reader interface IC for smart card reader/writer applications such as EFT/POS terminals and set top boxes.

It enables the management of any type of smart card from any kind of host.

Up to 4 AT83C26 can be connected in parallel thanks to the programmable TWI address.

Features

  • 5 Smart Card Interfaces.
  • Compliance with ISO 7816, EMV2000, GIE-CB and GSM Standards.
  • Direct Connection to the Smart Cards Logic Level Shifters Short Circuit Current Limitation 4kV+ ESD Protection (MIL/STD 883 Class 3).
  • 1 or 2 Master Smart Card interfaces Synchronous Card support (with C4 and C8 Contacts) Card Detection and Automatic de-activation sequence on card extraction.
  • 1 to 4 SAM/SIM cards (15 to 30mA each).
  • Programmable Voltage for e.

📥 Download Datasheet

Datasheet preview – AT83C26

📁 Similar Datasheet

  • AT83C22OK - Smart Card Interface Compliant (ATMEL)
  • AT83C24 - Smart Card Reader Interface (ATMEL)
  • AT83C25OK - CardMan Smart@Bus (Advanced Analogic Technologies)
  • AT8303 - Serial real-time clock (ANALOGTEK)
  • AT8325 - 5.5A Three-Channel Half-Bridge Integrated Driver (ZhongKe Microelectronics)
  • AT83251G2D - 8/16-bit Microcontroller (Atmel)
  • AT83SND2CMP3A1 - Single-Chip MP3 Decoder (ATMEL)
  • AT8025 - 2 x 8W + 15W single-chip 2.1-channel Class-D amplifier (ChipSourceTek)
  • AT80251G2D - 8/16-bit Microcontroller (Atmel)
  • AT8031 - 2.1/2.0 Channel Breakout Soundproof Class-D Amplifier (ChipSourceTek)
Other Datasheets by ATMEL Corporation

Full PDF Text Transcription

Click to expand full text
Features • 5 Smart Card Interfaces – Compliance with ISO 7816, EMV2000, GIE-CB and GSM Standards – Direct Connection to the Smart Cards Logic Level Shifters Short Circuit Current Limitation 4kV+ ESD Protection (MIL/STD 883 Class 3) – 1 or 2 Master Smart Card interfaces Synchronous Card support (with C4 and C8 Contacts) Card Detection and Automatic de-activation sequence on card extraction – 1 to 4 SAM/SIM cards (15 to 30mA each) – Programmable Voltage for each smart card Class A: 5V ±0.4V at 60 mA (±0.25V at 65 mA with VCC= 5V±10%) Class B: 3V ±0.2V at 60 mA Class C: 1.8V ±0.
Published: |