Datasheet4U Logo Datasheet4U.com

ATA6809 - Fail-safe IC

Description

The ATA6809 is designed to support the fail-safe function of safety-critical systems such as ABS.

Features

  • Digital Self-supervising Watchdog with Hysteresis Three 250-mA Output Drivers One Relay Driver, Two Lamp Drivers Lamp Drivers With Auxiliary Ground Short-circuit-protected Lamp Drivers Lamp Drivers With Status Feedback Enable Output Overvoltage/Undervoltage Detection and Reset All Power Outputs Protected Against Standard Transients All Power Outputs Protected Against 40V Load D.

📥 Download Datasheet

Datasheet preview – ATA6809

📁 Similar Datasheet

  • ATA6823C - H-bridge Motor Driver (ATMEL)
  • ATA6824C - High Temperature H-bridge Motor Driver (ATMEL)
  • ATA6824C - High-Temperature H-Bridge Motor Driver (Microchip)
  • ATA6826C - Triple Half-bridge DMOS Output Driver (ATMEL)
  • ATA6843 - BLDC Motor Driver (ATMEL)
  • ATA6844 - BLDC Motor Driver (ATMEL)
  • ATA644S28 - Asymmetric thyristors (PST)
  • ATA6560 - High-Speed CAN Transceiver (Microchip)
  • ATA6561 - High-Speed CAN Transceiver (Microchip)
  • ATA6562 - High-Speed CAN Transceiver (Microchip)
Other Datasheets by ATMEL Corporation
  • ATA6814 - Automotive Failsafe System IC
  • ATA6821 - High Speed Power Driver
  • ATA6824 - High Temperature H-Bridge Motor Driver
  • ATA6826 - Triple Half-bridge DMOS Output Driver
  • ATA6827 - High Temperature Triple Half-Bridge Driver
  • ATA6829 - Dual Triple DMOS Output Driver
  • ATA6830 - INTELLIGENT STEPPER MOTOR DRIVER
  • ATA6831 - Triple Half-bridge Driver with SPI and PWM

Full PDF Text Transcription

Click to expand full text
Features • • • • • • • • • • • • Digital Self-supervising Watchdog with Hysteresis Three 250-mA Output Drivers One Relay Driver, Two Lamp Drivers Lamp Drivers With Auxiliary Ground Short-circuit-protected Lamp Drivers Lamp Drivers With Status Feedback Enable Output Overvoltage/Undervoltage Detection and Reset All Power Outputs Protected Against Standard Transients All Power Outputs Protected Against 40V Load Dump Lamp Drivers Automatically Activated if VS is Disconnected Lamp Drivers Automatically Activated Via AUX GND if Standard Ground is Disconnected Fail-safe IC with Relay Driver and Lamp Driver ATA6809 1. Description The ATA6809 is designed to support the fail-safe function of safety-critical systems such as ABS.
Published: |