Datasheet4U Logo Datasheet4U.com

ATMEGA8A - 8-bit Atmel Microcontroller

General Description

VCC Digital supply voltage.

GND Ground.

XTAL1/XTAL2/TOSC1/TOSC2 Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit).

The Port B output buffers have symmetrical drive characteristics with both high sink and source capability.

Key Features

  • High-performance, Low-power Atmel®AVR® 8-bit Microcontroller.
  • Advanced RISC Architecture.
  • 130 Powerful Instructions.
  • Most Single-clock Cycle Execution.
  • 32 x 8 General Purpose Working Registers.
  • Fully Static Operation.
  • Up to 16MIPS Throughput at 16MHz.
  • On-chip 2-cycle Multiplier High Endurance Non-volatile Memory segments.
  • 8KBytes of In-System Self-programmable Flash program memory.
  • 512Bytes EEPROM.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
8-bit Atmel Microcontroller with 8KB In-System Programmable Flash ATmega8A Features • High-performance, Low-power Atmel®AVR® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16MIPS Throughput at 16MHz – On-chip 2-cycle Multiplier High Endurance Non-volatile Memory segments – 8KBytes of In-System Self-programmable Flash program memory – 512Bytes EEPROM – 1KByte Internal SRAM – Write/Erase Cycles: 10,000 Flash/100,000 EEPROM – Data retention: 20 years at 85C/100 years at 25C(1) – Optional Boot Code Section with Independent Lock Bits • In-System Programming by On-chip Boot Program • True Read-While-Write Operation – Programming Lock for Software Secu