Datasheet4U Logo Datasheet4U.com

ACPL-339J - Dual-Output Gate Drive Optocoupler

General Description

The ACPL-339J is an advanced 1.0 A dual-output, easy-touse, intelligent IGBT and Power MOSFET gate drive optocoupler interface.

Key Features

  • such as VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off, and isolated open collector fault feedback to provide maximum design flexibility and circuit protection. The ACPL-339J has an insulation voltage of VIORM = 1414 Vpeak in IEC/EN/DIN EN 60747-5-5. Features.
  • Dual output drive for external NMOS and PMOS buffer.
  • 1.0 A minimum peak output current.
  • Active timing control to prevent cross conduction in MOSFET buffer.
  • IGBT desaturation detec.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACPL-31JT Automotive 2.5-Amp MOSFET Gate Drive Optocoupler Broadcom
ACPL-350J MOSFET Gate Drive Optocoupler Broadcom
ACPL-352J 5.0Amp Output Current IGBT and SiC/GaN MOSFET Gate Drive Optocoupler Broadcom
ACPL-355JC 10A IGBT and SiC MOSFET Gate Drive Optocoupler Broadcom
ACPL-054L Digital Optocoupler Broadcom

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
ACPL-330J 1.5 Amp Output Current IGBT Gate Driver Optocoupler
ACPL-331J 1.5 Amp Output Current IGBT Gate Driver Optocoupler
ACPL-332J 2.5 Amp Output Current IGBT Gate Driver Optocoupler
ACPL-333J 2.5 Amp Output Current IGBT Gate Driver Optocoupler
ACPL-337J 4.0 Amp Gate Drive Optocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACPL-339J Dual-Output Gate Drive Optocoupler Interface with Integrated (VCE) DESAT Detection, FAULT and UVLO Status Feedback Data Sheet Description The ACPL-339J is an advanced 1.0 A dual-output, easy-touse, intelligent IGBT and Power MOSFET gate drive optocoupler interface. Uniquely designed to support MOSFET buffer of various current ratings, the ACPL-339J makes it easier for system engineers to support different system power ratings using one hardware platform by interchanging the MOSFET buffers and power IGBT/MOSFET switches. These changes can be made without redesigning the critical circuit isolation and short-circuit protection. This concept maximizes gate drive design scalability for motor control and power conversion applications ranging from low to high power ratings.