Datasheet4U Logo Datasheet4U.com

ACPL-T350 - 2.5 Amp Output Current IGBT Gate Driver Optocoupler

General Description

The ACPL-T350 contains a GaAsP LED.

The LED is optically coupled to an integrated circuit with a power output stage.

These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.

Key Features

  • 2.5A Absolute Maximum Peak Output Current.
  • 15 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V.
  • 1.5 V maximum low level output voltage (VOL).
  • ICC = 4 mA maximum supply current.
  • Under Voltage Lock-Out protection (UVLO) with hysteresis.
  • Wide operating VCC range: 15 to 30 Volts.
  • 500 ns maximum switching speeds.
  • Industrial temperature range: -40°C to 100°C.
  • Safety Approval - UL Recognized 3750 Vrms for 1 min.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACPL-054L Digital Optocoupler Broadcom
ACPL-064L Low-Power 10-MBd Digital CMOS Optocouplers Broadcom
ACPL-071L Single-Channel and Dual-Channel High-Speed 15-MBd CMOS Optocoupler Broadcom
ACPL-074L Single-Channel and Dual-Channel High-Speed 15-MBd CMOS Optocoupler Broadcom
ACPL-077L Low-Power 3.3V/5V High-Speed CMOS Optocoupler Broadcom

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
ACPL-021L 5 MBd Digital CMOS Optocoupler
ACPL-024L 5 MBd Digital CMOS Optocoupler
ACPL-061L Ultra Low Power 10 MBd Digital CMOS Optocoupler
ACPL-064L Ultra-Low-Power 10 MBd Digital CMOS Optocouplers
ACPL-071L Single-channel and Dual-channel High Speed 15 MBd CMOS optocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACPL-T350 2.5 Amp Output Current IGBT Gate Driver Optocoupler with Low ICC Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description The ACPL-T350 contains a GaAsP LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by these optocouplers make them ideally suited for directly driving IGBTs with ratings up to 1200 V/100 A.