3x4 CDMA (BC0/BC10 & BC1) CDMA Dual-Band Power
Amplifier Module with Integrated Coupler
Preliminary Data Sheet
The ACPM-920502 is the CDMA dual-band power amplifier
module with integrated directional couplers designed for CDMA
(3GPP2 BC0/BC10 & BC1) handsets as well as the wireless data
card applications. It is designed to meet the stringent linearity
requirements of the 3GPP and 3GPP2 standards including the
cdma2000, 1xEV-DO Rev.0 and Rev.A while keeping excellent
PAE over the entire power range by supporting 2 power modes
(low and high power modes). This PA has low quiescent current
and high PAE in both power modes. So the average power
consumption is minimized to enhance the talk time.
The ACPM-920502 contains integrated directional couplers, 50Ω
input and output matching networks, RF input & output DC blocking
capacitors as well as the Vcc decoupling/bypass capacitors,. All
these functions are integrated in a 16-pin surface-mount leadless
package of 3x4 mm form factor and 0.9 mm thickness, so it can
minimize the number of external components.
The integrated LB & HB directional couplers are daisy-chained
internally. One coupler input port and one coupler output port are
shared by the both bands.
CDMA dual-band PA supporting CDMA (BC0 / BC10, BC1)
2-mode power/gain control (low power and high power modes)
Integrated daisy-chained LB & HB directional couplers
High directivity (small coupled power or delivered power
variation into mismatched load)
Excellent PAE in low and mid power ranges.
Low quiescent current in low power mode
Excellent average power consumption and talk-time
Spectral linearity supporting IS-95, cdma2k, 1xEV-DO Rev.0
Internally matched 50Ω RF input & output ports
Internal RF input & output DC blocking capacitors
Internal Vcc1 & Vcc2 bypass capacitors
Internal Vref eliminating external LDO regulators and switches
1.8V CMOS compatible control logics (VH=1.35V~3.1V)
3x4x0.9mm 16-pad leadless surface-mount package
Lead-free, RoHS compliant, Halogen-free, Sb-free, Green
CDMA (BC0 / BC10 & BC1) dual -band handsets, Wireless
USB data card dongles and embedded data cards.
The ACPM-920502 has integrated on-chip Vref and on-module
bias switch, so the external LDO regulators and switches for
external Vref are not required. It also makes the PA fully digital-
controllable by the baseband chipset. The Ven pin turns the PA on
and off by the digital control signal. All of the digital control input
pins such as the Ven and Vmode are fully CMOS compatible down
to the 1.8V logic.
Tape & Reel (7”)
The ACPM-920502 is manufactured on an advanced InGaP/GaAs
HBT technology that provides excellent performance, temperature
stability, ruggedness, and reliability.
This preliminary data is provided to assist you in the evaluation of product(s) currently under development. Until
Avago Technologies releases this product for general sales, Avago Technologies reserves the right to alter prices, specifications, features,
capabilities, functions, release dates, and remove availability of the product(s) at anytime.