Datasheet4U Logo Datasheet4U.com

ADNS-7530 - Integrated molded lead-frame DIP Sensor

General Description

Positive Terminal of VCSEL LASER Enable (Active LOW) Chip select (active low input) Serial data output (Master In/Slave Out) Serial clock input Serial data input (Master Out/Slave In) Motion Detect (active low output) XYLASER 3V Input No Connection Ground 3V Input 1.8V regulator output Digital Groun

Key Features

  • Wide operating voltage: 2.7V-3.6V.
  • Small form factor, integrated molded lead frame DIP package.
  • Low power architecture.
  • LaserStreamâ„¢ technology.
  • Self-adjusting power-saving modes for longest battery life.
  • High speed motion detection up to 30 ips and 8g.
  • Enhanced SmartSpeed self-adjusting frame rate for optimum performance.
  • Motion detect pin output.
  • 12-bits motion data registers.
  • Internal oscillator.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADNS-7530 Integrated molded lead-frame DIP Sensor Data Sheet Theory of Operation The ADNS-7530 integrated molded lead-frame DIP sensor comprises of sensor and VCSEL in a single package. The advanced class of VCSEL was engineered by Avago Technologies to provide a laser diode with a single longitudinal and a single transverse mode. In contrast to most oxide-based single-mode VCSEL, this class of Avago VCSEL remains within single mode operation over a wide range of output power. It has significantly lower power consumption than a LED. It is an excellent choice for optical navigation applications.