900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






AVAGO

HCNW4504 Datasheet Preview

HCNW4504 Datasheet

High Speed Optocouplers

No Preview Available !

HCPL-4504/J454/0454, HCNW4504
High CMR, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-4504 and HCPL-0454 contain a GaAsP LED
while the HCPL-J454 and HCNW4504 contain an AlGaAs
LED. The LED is optically coupled to an integrated high
gain photo detector.
The HCPL-4504 series has short propagation delays and
high CTR. The HCPL-4504 series also has a guaranteed
propagation delay difference (tPLH-tPHL). These features
make the HCPL-4504 series an excellent solution to IPM
inverter dead time and other switching problems. The
CTR, propagation delay, and CMR are specified both for
TTL and IPM conditions which are provided for ease of
application. These single channel, diode-transistor opto-
couplers are available in 8-Pin DIP, SO-8, and Widebody
package configurations. An insulating layer between a
LED and an integrated photodetector provide electrical
insulation between input and output. Separate connec-
tions for the photodiode bias and output-transistor col-
lector increase the speed up to a hundred times that of
a conventional phototransistor coupler by reducing the
base collector capacitance.
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 NC
6 VO
5 GND
TRUTH TABLE
LED
ON
OFF
VO
LOW
HIGH
A 0.1 μF bypass capacitor between pins 5 and 8 is recommended.
Schematic
ICC 8
VCC
+
ANODE
2
VF
CATHODE
3
IF
SHIELD
IO 6
VO
5
GND
Features
Short propagation delays for TTL and IPM applications
15 kV/μs minimum Common Mode Transient immu-
nity at VCM = 1500 V for TTL/load drive
High CTR at TA = 25°C
>25% for HCPL-4504/0454
>23% for HCNW4504
>19% for HCPL-J454
Electrical specifications for common IPM applications
TTL compatible
Open collector output
Safety approval:
UL recognized
– 3750 V rms/1min. for HCPL-4504/0454/J454
– 5000 V rms/1min. for HCPL-4504 Option 020 and
HCNW4504
CSA approved
IEC/EN/DIN EN 60747-5-2 approved
– VIORM = 560 Vpeak for HCPL-0454 Option 060
– VIORM = 630 Vpeak for HCPL-4504 Option 060
– VIORM = 891 Vpeak for HCPL-J454
– VIORM = 1414 Vpeak for HCNW4504
Applications
Inverter circuits and Intelligent Power Module (IPM)
interfacing: High Common Mode Transient immunity
(> 10 kV/μs for an IPM load/drive) and (tPLH - tPHL)
Specified (see Power Inverter Dead Time section)
Line receivers: Short propagation delays and low in-
put-output capacitance
High speed logic ground isolation: TTL/TTL, TTL/
CMOS, TTL/LSTTL
Replaces pulse transformers: Save board space and
weight
Analog signal ground isolation: Integrated photode-
tector provides improved linearity over phototransis-
tors
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.




AVAGO

HCNW4504 Datasheet Preview

HCNW4504 Datasheet

High Speed Optocouplers

No Preview Available !

Ordering Information
HCPL-0454, HCPL-4504 and HCPL-J454 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNW4504 is UL Recognized with 5000 Vrms for 1 minute per UL1577. HCPL-0454, HCPL-4504, HCPL-J454 and
HCNW4504 are approved under CSA Component Acceptance Notice #5, File CA 88324.
Part
Number
Option
UL 1577
5000 Vrms/
RoHS non RoHS
Surface Gull Tape 1 Minute IEC/EN/DIN
Compliant Compliant Package Mount Wing & Reel rating EN 60747-5-2 Quantity
HCPL-4504
HCPL-J454
HCPL-0454
HCNW4504
-000E
-300E
-500E
-020E
-320E
-520E
-060E
-360E
-560E
-000E
-300E
-400E
-500E
-600E
-000E
-500E
-060E
-560E
-000E
-300E
-500E
no option
#300
#500
#020
#320
#520
#060
#360
#560
no option
#300
NA
#500
NA
no option
#500
#060
#560
no option
#300
#500
300 mil
DIP-8
300 mil
DIP-8
SO-8
400 mil
Widebody
DIP-8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XX
X
XX
X
XX
X
X
XX
XX
X
X
X
XX
X
X
X
X
X
X
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
X 50 per tube
X 50 per tube
X 1000 per reel
X 50 per tube
X 50 per tube
X 50 per tube
X 1000 per reel
X 750 per reel
100 per tube
1500 per reel
X 100 per tube
X 1500 per reel
X 42 per tube
X 42 per tube
X 750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-4504-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging
with IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-4504 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’
2


Part Number HCNW4504
Description High Speed Optocouplers
Maker AVAGO
Total Page 19 Pages
PDF Download

HCNW4504 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 HCNW4502 High Speed Optocouplers
HP
2 HCNW4502 High Speed Optocouplers
Avago
3 HCNW4503 High Speed Optocouplers
HP
4 HCNW4503 High Speed Optocouplers
Avago
5 HCNW4504 High Speed Optocouplers
HP
6 HCNW4504 High Speed Optocouplers
AVAGO
7 HCNW4506 Intelligent Power Module and Gate Drive Interface Optocouplers
HP
8 HCNW4506 Intelligent Power Module and Gate Drive Interface Optocouplers
Avago





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy