MGA-61563 Datasheet | Avago Technologies

Description Avago Technologies' MGA-61563 is an economical, easy-to-use Ga As MMIC amplifier that offers excellent linearity and low noise figure for applications from 0.1 to 6 GHz. Packaged in an miniature SOT-363 package, it requires half the board space of a SOT-143 package. One external resistor is used to set the bias current taken by the device over a wide range. This allows the designer to use the same part in several circuit positions and tailor the linearity performance (and current consumption) to suit each position. The MGA-61563 is normally operating with Id set in the 20-60m A range The output of the amplifier is matched to 50Ω (below 2:1 VSWR) across the entire bandwidth and only requires minimum input matching. The amplifier allows a wide dynamic range by offering a 1.2 d B NF coupled with a +28.5 d Bm Output IP3. The circuit uses state-of-the-art E-p HEMT technology with proven reliability. On-chip bias circuitry allows operation from a single +3V or +5V power supply, while internal feedback ensures stability (K>1) over all frequencies. Pin Connections and Package Marking Features - Single +3V or + 5V supply - High linearity - Low noise figure - Miniature SOT363 (SC70) package - Unconditionally stable - Lead-free option available Specifications at 2 GHz; 3V, 41 m A (Typ.) - 28.5 d Bm OIP3 - 1.2 d B noise figure - 16.6 d B gain - 15.8 d Bm P 1d B Package Diagram 6Ax GND 1 GND 2 OUTPUT and Vd 5 GND INPUT 3 4 BIAS Note: Package marking provides orientation and identification: “6A” = Device Code “x” = Date code indicates the month of manufacture. Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A) ESD Human Body Model (Class 0) Refer to Avago Technologies Application Note A004R: Electrostatic Discharge Damage and Control. Simplified Schematic Rbias Vbias Input match RFin 4 3 Ibias Feedback Bias Vd Id = Ids + Ibias Ids 6 RFout 1, 2, 5 GND MGA-61563 Absolute Maximum Ratings[1] Symbol...