Datasheet4U Logo Datasheet4U.com

AX6642 - 1.5A High Output Current LDO Regulator

Description

The AX6642/A is a low noise, high output current, low quiescent current and low dropout linear regulator.

The Device includes pass element, error amplifier, band-gap, current-limit and thermal shutdown circuitry.

The output current is up to 1.5A.

Features

  • Input voltage range : 2.6V~5.5V Dropout voltage is 450mV at 1.5A output current @ VOUT = 3.30V Guaranteed 1.5A output current Low quiescent current is 50µA (typ. ) Fixed Output voltage is form 1.2 V to 5V by 0.1V steps. Fast transient response Current limit and thermal shutdown protection Short circuit current fold-back Available in the 3-Pin Pb-Free SOT89, SOT-223, TO263, TO252 and SOP-8L packages VÛmw`R.
  • yÑb€  BLOCK.

📥 Download Datasheet

Datasheet Details

Part number AX6642
Manufacturer AXElite
File Size 641.58 KB
Description 1.5A High Output Current LDO Regulator
Datasheet download datasheet AX6642 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AX6120 Dot Matrix LCD Drivers ASLIC
AX6121 Dot Matrix LCD Drivers ASLIC
AX68 main board flow chart Trident
AX68-B Schematic Trident
AX68002 2-Port USB KVM Switch SoC ASIX

Other Datasheets by AXElite

Part Number Description
AX6642A 1.5A High Output Current LDO Regulator
AX6640 Low Noise CMOS Triple LDOs Regulator
AX6641 Low Noise LDO Regulator
AX6643 1.5A High Output Current LDO Regulator
AX6644 Dual Channel LDO Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AX6642/A 1.5A High Output Current LDO Regulator  GENERAL DESCRIPTION The AX6642/A is a low noise, high output current, low quiescent current and low dropout linear regulator. The Device includes pass element, error amplifier, band-gap, current-limit and thermal shutdown circuitry. The output current is up to 1.5A. The characteristics of low dropout voltage and less quiescent current make it good for some critical current application, for example, some battery powered devices. The typical quiescent current is approximately 50µA. Due to internal flexible design; result in extensively fixed output voltage versions form 1.2V to 5V per 0.1V steps. Built-in current-limit, Short current protection and thermal-shutdown functions prevent any fault condition from IC damage.
Published: |