ASM-xx.xxxxMHZ-F Datasheet | Abracon

CRYSTAL CLOCK OSCILLATORS 5.0Vdc - HCMOS/TTL PATABLE - J -LEADED - PLASTIC MOLDED - SURFACE MOUNT Features : 14.0 x 8.95 x 4.7 mm APPLICATIONS: - Industry standard J-leaded terminals. - Plastic molded SMD. - HCMOS and TTL patible. - Tristate Enable / Disable. - Extended temperature -40°C to +85°C option. - Wide range of applications in dialing munication equipment, AV / OA equipment, Measuring equipment. ASM ASMT ASMH SPECIFICATIONS (See Frequency Range PARAMETERS Operation Mode S TA N D A R(F D) Frequency Range Operating Temperature o Storage Temperature Operating Tempature (TOPR) Options) Storage Temperature .. S T A N D A R DSPECIFICATIONS SPECIFICATIONS STANDARD 3.5MHz - 25 MHz AT S P EFundamental, CI F I CA IO NS 1.00MHz -T 70.000MHz -10°C to + 60° C (See Options) @ -55°C 0°C to + to 125° Cance 25°C max. +70°C (See Options) (TSTO) Frequency Stability over Frequency Stability (DF/Temp. Fo) Equivalent Series Resistance Supply Voltage (Vdd) (ESR) Maximum Input Current (I dd) Duty Cycle or Symmetry Rise and Fall Times Shunt Capacitance C(T 0 R / TF) Output Load Load Capacitance CL Output Voltage (VOH) 2.4Vdc min. ; 0.9- Vdd min.(HCMOS) Drive Level 100 µW(TTL) max. Aging @ 25° C First Year ± max. 5 pp (TTL) m max. ; 0.1- Vdd max.(HCMOS) (VOL) 0.4Vdc _ 50 MHz) 15 p F (50p F max.) 10TTL 10 (for ms F< Start-up Time (TOSC) 10TTL max. 15 p F 5TTL ( for F> MHz) 15 p F (30p F max. 100 ns max. “1” or Open: 50 Oscillation VIH > _ 2.0V Output Disable / (50“0”: p F max.) for F > 50 Output disabled in high impedance (Hi Z) VIL < MHz) 0.8V Enable Disabled current (IDIS) 0.9 - Vdd min. 28m A max 2.4 Vdc min. 0.9 - Vdd min. 0.4 Vdc max. ±5ppm 0.4 V/dc max. Aging Year max. 0.1 - Vdd max. Note 1: Option -S (Symmetry level measured at 1/2 Vdd for HCMOS, and at 1.4 Vdc for TTL. Note 2: Pin 1 has internal pull-up resistor which allows pin 1 to be left floating (enable high) Connect a By-Pass capacitor 0.01 m F between Vdd and GND. Test circuit,...