datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Adaptive
Adaptive

VSP2400-80-30 Datasheet Preview

VSP2400-80-30 Datasheet

VSP Series High-power programmable power supplies

No Preview Available !

VSP2400-80-30 pdf
High-power programmable power supplies
Features:
Up to 1.2kW in 1U or up to 2.7kW in 2U
Standard 19” rack mount suitable for ATE and
OEM applications
Achieve up to 7.2kW by connecting up to three
1.2kW or 2.4kW units in parallel with active
current sharing
Zero voltage soft switching technique, low ripple
and noise
CV & CC: Constant Voltage/Constant Current
mode with auto mode crossover
LabViewand LabWindowsdrivers
Active PFC input with wide range input
Four digit display for voltage & current read back
Isolated analogue programming and monitoring
and RS232 interfaces as standard
Optional interfaces: RS485, GPIB and Ethernet
The Adaptive Power Systems VSP Series of Programmable Power
Supplies set a new standard for flexible, reliable AC to DC power
systems in OEM, Industrial and Laboratory applications. They have
been designed with excellent thermal management and can be
conveniently stacked in a 19” rack without the need for any space
between them for ventilation. The zero voltage soft-switching
technique employed in the VSP series virtually eliminates the
switching transients to derive lower noise, which is closer to levels
found in linear supplies. This also helps increasing the overall
conversion efficiency which in turn decreases the heat generation,
thus reducing the stress on the power components which results in
greater reliability.
(via card kit)
VSP DC Power Supply Model Selection Guide
Max
Power
Ripple
(RMS)
Output Noise
(90-20MHz)
Voltage
(peak to peak)
Comms
* Optional
Weight /
Dims
(W/H/D)
VSP600-10-60
VSP600-20-30
VSP600-30-20
VSP600-40-15
VSP600-60-10
VSP600-120-5
VSP1200-20-60
VSP1200-30-40
VSP1200-40-30
VSP1200-60-20
VSP1200-80-15
VSP1200-120-10
VSP2400-30-80
VSP2400-40-60
VSP2400-60-40
VSP2400-80-30
VSP2400-120-20
VSP2700-60-45
VSP2700-80-33
VSP2700-120-22
0-10V
0-20V
0-30V
0-40V
0-60V
0-120V
0-20V
0-30V
0-40V
0-60V
0-80V
0-120V
0-30V
0-40V
0-60V
0-80V
0-120V
0-60V
0-80V
0-120V
0-60A
0-30A
0-20A
0-15A
0-10A
0-5A
0-60A
0-40A
0-30A
0-20A
0-15A
0-10A
0-80A
0-60A
0-40A
0-30A
0-20A
0-45A
0-33A
0-22A
<10mV
<20mA
600W
<10mV
<10mA
<10mV
<20mA
1200W
<10mV
<10mA
2400W
2700W
<20mV
<10mA
<10mV
<20mA
<10mV
<10mA
<20mV
<10mA
<10mV
<10mA
<20mV
<10mA
<45mV P-P
Analogue
GPIB*
RS232*
RS485*
Ethernet*
7kg
19”, 1U,
450mm
13kg
19”, 2U,
450mm
801 Hailey Street, Ardmore, OK 73401, USA Tel: (949) 752-8400 Toll Free: (866) 517-8400
Email: sales@adaptivepower.com Web: www.adaptivepower.com
Free Datasheet http://www.0PDF.com



Adaptive
Adaptive

VSP2400-80-30 Datasheet Preview

VSP2400-80-30 Datasheet

VSP Series High-power programmable power supplies

No Preview Available !

VSP2400-80-30 pdf
General Specifications
AC input voltage
600W 95 to 264V AC, 47 to 63Hz, 1 Phase
1200W 95 to 264V AC, 47 to 63Hz, 1 Phase
2400W 175 to 264V AC, 47 to 63Hz, 1 Phase
2700W 175 to 264V AC, 47 to 63Hz, 1 Phase
Input power factor
For all models 0.99 typical @ full Load, nominal line
Switching frequency
For all models 45KHz nominal
Time delay
For all models 7 sec. maximum from power ON until output stable
Voltage mode transient response
For all models better than 200µS for load change from 40% to 90%.
Minimum voltage differential
For all models ±600V DC from output to safety ground
Remote analogue programming
For all models Voltage & current programming inputs through 0-5V (default), 0-10V or 0-4.85K for 0 to 100%
output voltage & current change
Remote analogue monitoring
For all models isolated voltage & current monitoring outputs 0-5V (default), 0-10V
Remote programming & monitoring accuracy
For all models 0.5% for 0 to 100% output
Maximum remote sense compensation
For all models 1V/Line
Operating temperature
For all models 0 to 50°C
Storage temperature
For all models -20 to 70°C
Humidity
For all models up to 90% RH non-condensing
Front panel voltage & current controls
For all models 10 turn potentiometers for voltage, current & over voltage set/digital rotary encoder
Input AC connection
600W 10A, 250V line socket
1200W 16A, 250V line socket/3core
2400W 3 way-terminal 30A, 415V terminal block/3 core, 20A
2700W 3 way-terminal 30A, 415V terminal block/3 core, 20A
Dimensions & Weight
600W & 1200W 19"(W), 1 U (H), 450 mm, 7 Kgs.
2400W & 2700W 19"(W), 2 U (H), 450 mm, 13 Kgs.
Conforming standards
CE mark: meets EN55022, class A, safety standard EN60950
Distributor:
Caltest Instruments Limited
4 Riverside Business Centre
Walnut Tree Close, Guildford, GU1 4UG
T. 01483 302700 E. info@caltest.co.uk
W. www.caltest.co.uk
Specification subject to change without notice. LabView and LabWindows are registered trademarks or National Instruments.
801 Hailey Street, Ardmore, OK 73401, USA Tel: (949) 752-8400 Toll Free: (866) 517-8400
Email: sales@adaptivepower.com Web: www.adaptivepower.com
Free Datasheet http://www.0PDF.com


Part Number VSP2400-80-30
Description VSP Series High-power programmable power supplies
Maker Adaptive
Total Page 2 Pages
PDF Download
VSP2400-80-30 pdf
VSP2400-80-30 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 VSP2400-80-30 VSP Series High-power programmable power supplies Adaptive
Adaptive
VSP2400-80-30 pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy