The Adesto® AT25SF161is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution.
Key Features
Single 2.5V - 3.6V Supply.
Serial Peripheral Interface (SPI) Compatible.
Supports SPI Modes 0 and 3.
Supports Dual and Quad Output Read.
104MHz Maximum Operating Frequency.
Clock-to-Output (tV) of 6 ns.
Flexible, Optimized Erase Architecture for Code + Data Storage.
Full PDF Text Transcription for AT25SF161 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AT25SF161. For precise diagrams, and layout, please refer to the original PDF.
AT25SF161 16-Mbit, 2.5V Minimum SPI Serial Flash Memory with Dual-I/O and Quad-IO Support Features Single 2.5V - 3.6V Supply Serial Peripheral Interface (SPI) Compati...
View more extracted text
Single 2.5V - 3.6V Supply Serial Peripheral Interface (SPI) Compatible Supports SPI Modes 0 and 3 Supports Dual and Quad Output Read 104MHz Maximum Operating Frequency Clock-to-Output (tV) of 6 ns Flexible, Optimized Erase Architecture for Code + Data Storage Applications Uniform 4-Kbyte Block Erase Uniform 32-Kbyte Block Erase Uniform 64-Kbyte Block Erase Full Chip Erase Hardware Controlled Locking of Protected Blocks via WP Pin 3 Protected Programmable Security Register Pages Flexible Programming Byte/Page Program (1 to 256 Bytes) Fast Program and Erase Times 0.
AT25SF161 Datasheet
