Datasheet4U Logo Datasheet4U.com

AAT3153 - High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications

Description

The AAT3153 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications.

The AAT3153 is capable of driving sixchannel LEDs from a 2.7V to 5.5V input.

Features

  • ChargePump™.
  • VIN Range: 2.7V to 5.5V Fully Programmable Current with Single Wire.
  • Eight-Step Current: 20mA-50µA.
  • Individual Main-Sub Group Control.
  • Low IQ (40µA) at Light Load Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage Drives Up to Six Channels of LEDs No Inductors, Low Noise Operation 1MHz Constant Switching Freque.

📥 Download Datasheet

Datasheet Details

Part number AAT3153
Manufacturer Advanced Analogic Technologies
File Size 194.73 KB
Description High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications
Datasheet download datasheet AAT3153 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AAT3151 High Efficiency 1X/1.5X/2X Charge Pump Skyworks
AAT3151B High Efficiency 1X/1.5X Charge Pump Skyworks
AAT3152 High Efficiency 1X/1.5X/2X Charge Pump Skyworks
AAT3155 High Efficiency 1X/1.5X/2X Charge Pump AAT
AAT3155 High Efficiency 1X/1.5X/2X Charge Pump Skyworks

Other Datasheets by Advanced Analogic Technologies

Part Number Description
AAT3151 High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications
AAT3152 High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications
AAT3156 High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications
AAT3104 Low Cost 1x/2x 4 Channel Charge Pump WLED Driver
AAT3110 MicroPower Regulated Charge Pump

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com AAT3153 High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications General Description The AAT3153 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3153 is capable of driving sixchannel LEDs from a 2.7V to 5.5V input. The current sinks may be operated individually or in parallel for driving higher-current LEDs. Low external parts count (two 1µF flying capacitors and two small 1µF capacitors at VIN and VOUT) makes this part ideally suited for small battery-powered applications.
Published: |