Datasheet4U Logo Datasheet4U.com

APE8873 - 1.6X LINEAR REGULATOR

General Description

The APE8873 is a low dropout linear regulator which is designed to power a DC fan and delivers up to 500mA output current.

The output voltage follows the 1.6 times of VSET voltage and typical dropout voltage is only 150mV (typical) at 500mA output current.

Key Features

  • Low Dropout Voltage: 150mV@0.5A VO Follows 1.6 times of VSET Enable/Shutdown function Stable with Low ESR Ceramic Capacitors Current-Limit and Thermal Shutdown Protection SOP-8 Pb-Free Package APE8873.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
APE8412 very low cost voice and melody synthesizer with 4-bits CPU Apuls Intergrated Circuits
APE8416 very low cost voice and melody synthesizer with 4-bits CPU Apuls Intergrated Circuits
APE0504 very low cost voice and melody synthesizer with 4-bits CPU Apuls Intergrated Circuits
APE0508 very low cost voice and melody synthesizer with 4-bits CPU Apuls Intergrated Circuits
APE0612 very low cost voice and melody synthesizer with 4-bits CPU Apuls Intergrated Circuits

Other Datasheets by Advanced Power Electronics Corp

Part Number Description
APE8875 1.6X LINEAR REGULATOR
APE8800 300mA LOW DROPOUT LINEAR REGULATOR
APE8800A 300mA Low Dropout Linear Regulator
APE8805 LOW DROPOUT LINEAR REGULATOR
APE8805A 600mA Low Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Advanced Power Electronics Corp. FEATURES Low Dropout Voltage: 150mV@0.5A VO Follows 1.6 times of VSET Enable/Shutdown function Stable with Low ESR Ceramic Capacitors Current-Limit and Thermal Shutdown Protection SOP-8 Pb-Free Package APE8873 DESCRIPTION The APE8873 is a low dropout linear regulator which is designed to power a DC fan and delivers up to 500mA output current. The output voltage follows the 1.6 times of VSET voltage and typical dropout voltage is only 150mV (typical) at 500mA output current. The V SET voltage must be larger than 1V to guarantee V O 1.6 times of VSET. An enable pin further reduces power dissipation while shut-down.