Datasheet4U Logo Datasheet4U.com

ALN1701 - Internally Matched LNA Module

General Description

The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on

Key Features

  • S21 = 30.5 dB @ 1550 MHz = 29.5 dB @ 1850 MHz.
  • NF of 0.95 dB over frequency.
  • Unconditionally Stable.
  • Single 5V Supply.
  • High OIP3 at Low Current Specifications (in Production) Typ. @ T = 25°C, Vs = 5 V, Freq. =1700 MHz, Zo. sys = 50 ohm Parameter Frequency Range Gain Gain Flatness Noise Figure Output IP3 S11 / S22 (1) (2) Unit MHz dB dB dB dBm dB dBm Specifications Min 1550 29 30 ± 0.5 0.95 35 19 36 -20 / -10 20 80 5 50 C. W 29 ~ 31 (before fail) Surface Mount Type, 13.

📥 Download Datasheet

Datasheet Details

Part number ALN1701
Manufacturer Advanced Semiconductor
File Size 361.05 KB
Description Internally Matched LNA Module
Datasheet download datasheet ALN1701 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
plerowTM ALN1701 www.DataSheet4U.com Internally Matched LNA Module Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment.